Lao17

i have a 91 civic hatch dx that i just put a ls vtec swp in. im running an obd1 p30 ecu obd1 injectors and dizzy. and an ond0-obd1 jumper harness. the car starts up and idles but i just took it for a test drive and when i put it in first and step on the gass i dont go anywhere!? haha. and it doesnt rev when i have it in gear when i press on the gas but when i let go of the gas it revs just a little bit.

i have no clue why it does that. i had a tech from honda check my timing and he said its pretty close on point. and i had anotherguy said i need to wire my injectors straight to my ecu cause im not gettin fuel when i press on the gas or something. so im just tryingto get some more input on what to do. thanks for the help

Lao17

no hel?

asocallocal

get a ecu for a 1.8 so it can giv u more gas.

check ur fuel filter.

JARROD

did you convert the car to multi point?

nsxter

why would a tech say that the timing is pretty close on point, it should be right on not close