How to install a pedal Stopper!
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: usa
Posts: 3,526
Likes: 0
Received 0 Likes
on
0 Posts
How to install a pedal Stopper!
Need advice on how to install one. Im having trouble getting in gears @ high RPM's after installing the tilton twin disc on my race car, was told that i might need a pedal stopper.
#3
Honda-Tech Member
Re: How to install a pedal Stopper!
Weld a couple nuts to the floor and install a bolt with a large head.
Or
Weld a nut on the clutch arm and install a bolt with a large head.
Or....
There are a bunch of options. You need a pedal stop so that you do not over stroke the clutch as it says in the instructions.
Or
Weld a nut on the clutch arm and install a bolt with a large head.
Or....
There are a bunch of options. You need a pedal stop so that you do not over stroke the clutch as it says in the instructions.
#5
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: usa
Posts: 3,526
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#12
Honda-Tech Member
Join Date: Feb 2007
Location: glendale, az, usa
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install a pedal Stopper!
You can just use the clutch start sensor as a stopper. If you get under the dash you will see the sensor on the pedal. Just un plug it and screw it in towards the pedal
Thread
Thread Starter
Forum
Replies
Last Post