SolAssassin

Aside from opening the tranny, is there a way to figure out whether or not the LSD has been removed? Not for my tranny, my friend has an LSD tranny that was rebuilt by a friend, but now he's suspicious that he stole the LSD out of it. It's still sitting in the garage, and he's afraid to crack it open. Can you stick the axles in it and spin one to see if the other one spins? Or remove the speed sensor or something and check with a flashlight?

zccr-xsi

look into the axles holes if u can see though it it has lsd,if u can see a bar going across the hole then its non lsd.

SolAssassin

does that apply even if the tranny is an LSD tranny to begin with? it's a factory LSD with a factory LSD tranny (M2B4 i think)

zccr-xsi

yea!

SolAssassin

thanks for the info

zccr-xsi

no problem!

jetmech53

Any other way to tell an LSD? I read there should be an ink stamped "LSD", but this does not hold true for cheaters trying to sell a non-lsd, (easy to apply). The one I'm looking at has no bar in the center. It also has no ID /bar code tag either. Thanks

all-in

it should have the lsd then.