Help putting honda motor in sandrail please
#1
Thread Starter
Join Date: Aug 2007
Location: Roanoke, VA, USA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Help putting honda motor in sandrail please
Hey guys, im new, and am looking to use some of your expertise. I would like to put probably an H22 into my four seater street legal sandrail, i am in the process of building it at the moment. How difficult would it be to get the wiring straight with the ECU? It will be using a VW manual transaxle. Will this be a problem? I have the adapter plate and flywheel for the engine/tranny, but im just worried about the ECU and the wiring. If anyone is near SW Virginia, i would gladly pay for some help when i get ready to do it, otherwise, any words of advice you can provide now will be MOST GREATLY appreciated!!
#2
Honda-Tech Member
Re: Help putting honda motor in sandrail please (drk05)
No it will not be difficult. I have built many harnesses for sand rails out in CA. Pretty much only have to run a handful of sensors that the ECU requires.
Thread
Thread Starter
Forum
Replies
Last Post