mikesrex

I have a 90 teg that I had to temporarily run on a P28 and OBD1 dizzy until I could fix my non-OBD dizzy. I made a conversion harness from some 93 civic ECU plugs and a gutted non-OBD ECU I had laying around, and everything checks out when I do a continuity test for all the wiring. When I run the P28, I get an ELD code when checking for codes, and I can't remember if the 90 teg has ELD.

can someone confirm if the 90 teg has an ELD sensor? I am going to drop my B20VTEC as soon as I get the block back from the machine shop, so I want to make sure I have everything buttoned up on the car and my OBD1 conversion once I put the B20VTEC in. Just in case it matters, the teg is a 5 speed and an RS.

thanks

Mike

ochocinco

No it does not.

seanbev24

X2 it doesn't. When I had my obd1 gsr motor in my 91, the eld was a stored code but didn't light the cel. It didn't affect anything.

mikesrex

thanks guys!