Buddy Club spec 3+ camshaft. problems?
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: Sundbyberg, Stockholm, Sweden
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Buddy Club spec 3+ camshaft. problems?
i own a B16A2 with Buddy club spec 3+ (stage 1) camshafts installed.
as you can se the clearance is very tight.. like 0.017 inches.
the car has never drived good since the camshafts were installed. jumpy idle and bad vtec engage..
are the camshaft grinded wrong from the beginning? have i recieved wring camshafts?
as you can se the clearance is very tight.. like 0.017 inches.
the car has never drived good since the camshafts were installed. jumpy idle and bad vtec engage..
are the camshaft grinded wrong from the beginning? have i recieved wring camshafts?
#3
Honda-Tech Member
Join Date: Mar 2008
Location: Sacramento, CA, United States
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Re: Buddy Club spec 3+ camshaft. problems?
Wow those are not buddy club 3+'s. those cams have massive lift more like Buddy Club V's. I own a set of 3+, and the cams in the picture are not buddy club's stage one cam.
#4
Junior Member
Thread Starter
Join Date: May 2007
Location: Sundbyberg, Stockholm, Sweden
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Re: Buddy Club spec 3+ camshaft. problems?
Tuned twiced and degreed like the paper i got with the camshafts.. no luck :/
So you think i recieved wrong camshafts in the package?
lsvtecwill: okay! you have any pics of yours?
thanks!
So you think i recieved wrong camshafts in the package?
lsvtecwill: okay! you have any pics of yours?
thanks!
#6
Honda-Tech Member
Join Date: Oct 2007
Location: Hawaii
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Re: Buddy Club spec 3+ camshaft. problems?
I just orderd a set of BuddyClub Spec III cams. How do you guys like them? Wheres the power band at? Does it make power above 8,500 RPM? Let me know how you guys like these cams.
Thread
Thread Starter
Forum
Replies
Last Post
vtecmonster001
All Motor / Naturally Aspirated
31
02-10-2012 10:24 AM
Short_Shifter
Tech / Misc
8
02-06-2002 01:30 PM