Best aftermarket Valvetrain for LS VTEC
#1
Junior Member
Thread Starter
Join Date: Jul 2002
Location: Tucson, Az
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
Best aftermarket Valvetrain for LS VTEC
I am posting this for a friend. He has a 1993 Civic Dx 2 door coupe. He hydrolocked his motor and is now going to go LS VTEC. He is going to have a GSR block with a JDM B16 head and type r cams. He will be using LS pistons, rods, and the ls crank. He needs a new valve train for the head. What kind of valve train shoud he buy? Any suggestions would be appreciated.
[Modified by IntegraLStuner, 11:03 PM 7/19/2002]
[Modified by IntegraLStuner, 11:03 PM 7/19/2002]
#2
Honda-Tech Member
Join Date: Mar 2001
Location: San Antonio, TX, US
Posts: 1,030
Likes: 0
Received 0 Likes
on
0 Posts
Re: Best aftermarket Valvetrain for LS VTEC (IntegraLStuner)
He won't be able to really take advantage of the R cams unless he bumps up his compression to > 10:1. Also since your'e using R cams, just use the R valve springs.
#3
Re: Best aftermarket Valvetrain for LS VTEC (bruthaboost)
gsr+b16 head=low compression bad for all motor
If he is going to stick with the R cams, you could get in R inner and outer springs. Or portflow springs, with R springs. Maybe the retainers should be upgraded to.
If he is going to stick with the R cams, you could get in R inner and outer springs. Or portflow springs, with R springs. Maybe the retainers should be upgraded to.
Thread
Thread Starter
Forum
Replies
Last Post