civics4lyfe

Just got my koni/gc set with 2 extended top hats for the front. The eg shell they are going on is stripped atm, so just making sure i understand GC's vague notes and order everything I need to assemble the rears (extended top hats came with everything for the front).

(2) oem top hats
(4) oem shock mount bushings
(2) oem bump stops

is this all or am I missing something?
thanks in advance

azzazel_9

what kinda shocks? Usually you will re use the factory bump stops but depending on shocks you may want to cut them down some to make them shorter

808zrk

^ what he said

also depends how low your'e going, if you aren't gonna slam it you probably dont have to cut the oem bump stops, otherwise cutem in half

90_EX_Civic

don't you have the top hats from your stock shocks? also seems about right. and depending on how long your bump stops are, you might not need to cut them.

civics4lyfe

Koni yellows

First post states, there is nothing. I got trailing arms, front knuckles, control arms, brakes off a gsr. No existing suspension. Making sure I have everything when I go make an order at the dealership tomorrow.

civics4lyfe

mild drop, the car is being setup for road racing/autox. running a 15x7 rpf1 with a 225/50/15 and 10mm spacers. probably wont need to cut the rear bump stops, 500lbs spring rate with a 24mm sway bar so there wont be much flex

90_EX_Civic

is everything you are doing going to be legal in the class your car is going to be running in?

Libertariat

As long as he's not running race tires, has a full interior, or has any major engine mods he should still be legal in ST.