ETD racing
10-01-2006, 04:29 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: eCtune Dev country, SR
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
ETD racing
10-06-2006, 10:52 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: eCtune Dev country, SR
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Re: ETD racing (JDMTurboEG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMTurboEG6 »</TD></TR><TR><TD CLASS="quote">i used to have a set. craftsmanship is pretty good but it hangs about an inch lower than the jack up point on the front of the car.</TD></TR></TABLE>
that sucks and z10/full-race?
that sucks and z10/full-race?
Trending Topics
10-07-2006, 07:50 PM
#9
Join Date: Apr 2005
Location: Mobile, AL, USA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: ETD racing (calvinPGMFI)
I have those on my 95 hatch and they make a big difference. The do hang kinda low but I think it helps to give them a better angle too. My car is pretty low and they only scrape when I go too fast over a particular dip that lets rainwater cross the road in my neighborhood. It's never a problem otherwise. The shipping is a little bit slow from Canada but not too bad.
10-08-2006, 02:10 AM
#10
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: eCtune Dev country, SR
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Re: ETD racing (I B BANGGIN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I B BANGGIN »</TD></TR><TR><TD CLASS="quote">i think all traction bars bolt into place..</TD></TR></TABLE>
Full race bolts to the outer bolt the lower arm.
ETD bolts/JimFab bolts to the inner and outer bolt of the lower arm
Full race bolts to the outer bolt the lower arm.
ETD bolts/JimFab bolts to the inner and outer bolt of the lower arm
10-08-2006, 09:21 AM
#11
Honda-Tech Member
Join Date: Jul 2006
Location: houston, tx, usa
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Re: ETD racing (calvinPGMFI)
sorry i read your statement wrong...i thought i read that they bolt INTO place, not what you wrote, they bolt in 2 places..
a friend on mine here ordered the same ones and said it looked kinda cheap but i have seen them in person...they look good in the pics.
a friend on mine here ordered the same ones and said it looked kinda cheap but i have seen them in person...they look good in the pics.
10-21-2006, 01:38 PM
#16
Honda-Tech Member
Join Date: Aug 2002
Location: RIP EARL
Posts: 2,408
Likes: 0
Received 0 Likes
on
0 Posts
Re: ETD racing (calvinPGMFI)
theres some pics on g2ic where the etd bar came apart. A few have had major problems with durability for daily driving with them
10-25-2006, 05:30 PM
#17
Honda-Tech Member
Join Date: Jan 2006
Location: Tallahassee, Fl
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to share that my friend's ETD bar just snapped... he was just driving down the road and it sounded just like he ran over a plastic bottle or something.. turns out it snapped right on the main bar near the welds.
It's a great bar, but it appears that, at least his, has a weak spot(s).
It's a great bar, but it appears that, at least his, has a weak spot(s).
Thread
Thread Starter
Forum
Replies
Last Post
integracura
Acura Integra
7
02-17-2007 01:12 PM
