kcem1

Was wondering if any company makes end links or are the factory ones from a 00 civic si as good as it gets. tried searching and found nothing any help would be great.

tsispyder97

If you are talking about the long bolts nad 4 sets of bushings and cups, energy suspensino makes them.

ArinX

i know someone makes em, because i saw a set on ebay.

The guy said they were aftermarket but when i e-mailed asking who made it he pretended to not know what auction i was talking about.

adrenajunky

energy makes front swaybar endlinks and the bushings are ok but the hardware they give you is junk. i replaced my fronts and it feels sloppier than the worn out stock ones. anyone else had that problem? i have yet to find rear swaybar endlinks.

chrisw85

Adrena, i assume you got the front endlink kit for DC2/EG, comes with new poly bushings (8 total, 4 each side) and bushing 'cups'/washers and bolt and nuts and spacers. The front endlinks from energy for DC2/EG is part # 16.8104 and are about $13.

I've installed it on my bros 94 civic, and it felt much better. They key is not to wrench on the nut all the way; this will crush the poly bushigns too much it even shows this in the picture they give you. I tightened it just enough where it'd contact the bushings but no further.

adrenajunky

oh. ha ha. i torqued them dwn w/ with impact gun

Domani_Vi-RS

aftermarket, i believe srr makes a good one. as for OEM: i hear CTR ones are quite fat and it's oem so you know it's a good quality one

lowgman

http://www.a-spec-racing.com has aftermarket endlinks for the 00 si. The site is down right now, but get in touch with Charleston once the site is back up. Good guy