**what will dump an EF??**
#51
Honda-Tech Member
Join Date: Jan 2007
Location: ft worth, tx, united states
Posts: 801
Likes: 0
Received 2 Likes
on
2 Posts
Re: **what will dump an EF??**
ya i know...im just kinda upset i went b series instead of like a mini me and still had some left for suspension...i might try some skunk two springs...but i guess ill be saving for some konis...
bummer..
thanks guys guys btw..
and ps that crx is sick...and more on the top hats!
bummer..
thanks guys guys btw..
and ps that crx is sick...and more on the top hats!
#52
#53
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: High Des-CA
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Re: **what will dump an EF??**
**what will dump an EF??** anwser = Koni yellow & skunk2 coilovers + 1" top hats up front & 2" top hats in rears...& can still lower about another inch all around. Ride perfect.
#55
Honda-Tech Member
Re: **what will dump an EF??**
Please tell me you used the Skunk2 Koni adapters? Koni guy said himself it wouldn't be wise to run it without, plus you will lose the warranty. BTW Told you so.
#57
Junior Member
Join Date: Sep 2006
Location: Sacramento, CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: **what will dump an EF??**
#58
Honda-Tech Member
Re: **what will dump an EF??**
So if you have a coilover setup and it won't go low enough just buy shorter springs.
If you went an inch lower the control arms would be hitting constantly.
If you went an inch lower the control arms would be hitting constantly.
#59
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: High Des-CA
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Re: **what will dump an EF??**
I believe so, + severly rubbing tires + cant get out of my drive way. Im now about 1/2 - 3/4 of an inch higher = problem solved
#61
Honda-Tech Member
Re: **what will dump an EF??**
Here you go grasshopper. https://honda-tech.com/forums/suspension-brakes-54/not-write-up-write-up-skunk2-konis-2592526/
#65
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: High Des-CA
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
#66
Honda-Tech Member
Join Date: Feb 2009
Location: waaaaAHHHHHH
Posts: 1,298
Likes: 0
Received 0 Likes
on
0 Posts
Re: **what will dump an EF??**
Also you might want to just weld on the inside of the bottom tube to aviod the weld interfering with the mating surface of the top hat and chassis.
#67
Honda-Tech Member
Thread Starter
Join Date: Apr 2009
Location: High Des-CA
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
Re: **what will dump an EF??**
^^ yeah, found that out the hard way. But I just grinded the welds smooth again + a washer. either way it works. roughly 2000 miles and still rides like butter
Thread
Thread Starter
Forum
Replies
Last Post