2000 honda civic EX usdm b16a2 vsm
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2008
Location: GARDEN GROVE, ca, o.c.
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
2000 honda civic EX usdm b16a2 vsm
Trying to sell my 2000 vsm EX coupe. holds a salvage title don't know why. I've owned the car since 2007. It has been my daily driver since then but it's time to get something a little bigger. Pictures will be up before 5pm. Car is very reliable idles perfectly. Very straight. Here are the pros and cons:
miles on chassis are around 170k
on motor around 125K give or take 3,000 miles
Cons:
Salvage title
driver speaker doesn't work
needs new shifter bushings at the tranny side
will not pass smog for obvious swap reasons
i re-installed the cruise control unit but it doesn't work
no power steering
I myself got into a front end accident on the front right passenger corner. no frame damage. (replaced) core support.
needs alignment due to a bad axle that I just replaced.
2nd gear pops out at times. during slow speed while turning.
clear coat is pealing
Pros:
Car is all one color except for hood
VIS carbon fiber hood 7/10 condition
Password JDM fenders w/stanley side markers
jdm thin side moldings
usdm B16a2 with matching tranny
CTR OE headlights
Raybrig fog lights
oem SI lip
15"x7 Enkei 92 -black with 85% thread
DA rear disc brakes with 2000 SI brake cables. (polyurethane trailing arm bushings)
goodridge brake lines
A/C
Jdm oe intake box
rebuilt manual steering rack installed last year with new outer tie rods.
Honda window visors
Honda sunroof visor
2000 Si seats, and climate control interior condition 7/10 not missing any interior parts
oe floor mats
Skunk2 shifter w/spoon ****
Si strut tower brace
ASR rear brace with itr sway bar
polished rear lower control arms with poyurethane bushings
H brace under engine
mud flaps
ctr replica grille
Skunk2 first gen manifold/skunk2 throttle body
ctr red valve cover
generic headers
stage 3 sprung clutch chatters a bit
no check engine lights- running stock 2000 si ecu
energy shifter and front sway bar bushings
k sport coilovers but might need replacing in the next year or two
single beam 6k HID headlights
wiring harness is not tucked, so if you ever have a wiring problem you wont break your head trying to find it.
i think thats it.
contact me at 714-864-1903 for more info. or questions
price is $4,500 as listed
or
$3,500 WITHOUT rims, control arms, asr/swaybar, si lip, sunroof visor and no headlights. of course i'll give you stock control arms and stock headlights. but you must bring your own wheels to drive it away.
Price on it is firm and fair considering all the clean title buckets out there with mismatched body panels, that need another grand spent to get them running good.
miles on chassis are around 170k
on motor around 125K give or take 3,000 miles
Cons:
Salvage title
driver speaker doesn't work
needs new shifter bushings at the tranny side
will not pass smog for obvious swap reasons
i re-installed the cruise control unit but it doesn't work
no power steering
I myself got into a front end accident on the front right passenger corner. no frame damage. (replaced) core support.
needs alignment due to a bad axle that I just replaced.
2nd gear pops out at times. during slow speed while turning.
clear coat is pealing
Pros:
Car is all one color except for hood
VIS carbon fiber hood 7/10 condition
Password JDM fenders w/stanley side markers
jdm thin side moldings
usdm B16a2 with matching tranny
CTR OE headlights
Raybrig fog lights
oem SI lip
15"x7 Enkei 92 -black with 85% thread
DA rear disc brakes with 2000 SI brake cables. (polyurethane trailing arm bushings)
goodridge brake lines
A/C
Jdm oe intake box
rebuilt manual steering rack installed last year with new outer tie rods.
Honda window visors
Honda sunroof visor
2000 Si seats, and climate control interior condition 7/10 not missing any interior parts
oe floor mats
Skunk2 shifter w/spoon ****
Si strut tower brace
ASR rear brace with itr sway bar
polished rear lower control arms with poyurethane bushings
H brace under engine
mud flaps
ctr replica grille
Skunk2 first gen manifold/skunk2 throttle body
ctr red valve cover
generic headers
stage 3 sprung clutch chatters a bit
no check engine lights- running stock 2000 si ecu
energy shifter and front sway bar bushings
k sport coilovers but might need replacing in the next year or two
single beam 6k HID headlights
wiring harness is not tucked, so if you ever have a wiring problem you wont break your head trying to find it.
i think thats it.
contact me at 714-864-1903 for more info. or questions
price is $4,500 as listed
or
$3,500 WITHOUT rims, control arms, asr/swaybar, si lip, sunroof visor and no headlights. of course i'll give you stock control arms and stock headlights. but you must bring your own wheels to drive it away.
Price on it is firm and fair considering all the clean title buckets out there with mismatched body panels, that need another grand spent to get them running good.
Thread
Thread Starter
Forum
Replies
Last Post
chemik
Texas -OK -LA (Sales)
7
08-03-2009 08:05 AM