Tons of Integra stuff.. 5zigen wheels, lug nuts, Spoon, Kics, Koni Yellow/GC, etc
#1
Honda-Tech Member
Thread Starter
Tons of Integra stuff.. 5zigen wheels, lug nuts, Spoon, Kics, Koni Yellow/GC, etc
Have pictures for most of this stuff.. but not all. Will take more pictures upon request!!
2) Koni Yellows and Ground Control coilovers WITH extended top hats - all for 92-95 EG and 94-01 DC (excluding ITR rear LCAs)
Spring rates are 450f and 400r. VERY nice for both daily driving and autocross use. Extended top hats give you insane shock travel, even when you're slammed. No bottoming out! Less than 1,500 miles on the full setup. Retail for all of it is about $1200. This is THE suspension setup of choice for people who are serious about handling.
Everything comes fully assembled, ready to install, even with the extended top hats. I don't want to take any of it apart.
Price: $800
3) Spoon N1 axle-back muffler for DC2 fitment (like new)
This was purchased brand new from R&D Motorsports in April of 07. I'm the original owner, and it's been mounted only once, on one car. I have not altered it or hacked it up to fit in any way whatsoever. Fits perfectly on a DC, and looks 95% brand new, as the pictures will all show.
The diameter throughout the piping is 2.36" (60mm) which is considered ideal for mostly stock to mildly built NA engines. Not to mention, the very unique and distinct sound that only a legitimate Spoon N1 will provide. The axle-back itself weighs only 8 lbs, which makes a huge weight savings over stock as well.
Price: $325
4) Carsound (Magnaflow) OEM-fitment high flow cat for 94-99 GSR
I purchased this brand new in April of 07. I am the original owner, and it has been mounted only on my Integra. It was a 100% perfect fitment on my 98 GSR, with US-spec header length and US-spec exhaust length. It will fit perfectly on any other 94-99 GSR. I can't guarantee fitment on any other Integra models.
It has an inner diameter of 2" where it meets the header and diameter of 1.75" where it meets the midpipe. Do not be discouraged if you think this is small. I noticed a significant power gain, despite having 2.25" header and 2.36" exhaust. A 2.5" in/2.5" out cat will be VERY loud and more than likely VERY raspy. I have been extremely pleased with the sound and quality of this cat. And you can't beat right out of the box OEM fitment
Price: $75
7) JDM ITR shift boot (black with red stitching)
Like new (like everything else..) and inside of original packaging right now.
Price: $20
8) ARP extended wheel studs for 88-00 Hondas. Set of 16. 8 of them were installed for a few thousand miles, 8 of them are still sealed and unopened.
Price: $40 for all 16 of them.
I will add more things as I find them lying around..
I'm located in Lexington, KY, but I'm willing to drive to Louisville or anywhere in between. Prices are somewhat negotiable. Please don't lowball me or waste my time.
kthxbye
Modified by Rzoops at 6:57 PM 10/7/2007
2) Koni Yellows and Ground Control coilovers WITH extended top hats - all for 92-95 EG and 94-01 DC (excluding ITR rear LCAs)
Spring rates are 450f and 400r. VERY nice for both daily driving and autocross use. Extended top hats give you insane shock travel, even when you're slammed. No bottoming out! Less than 1,500 miles on the full setup. Retail for all of it is about $1200. This is THE suspension setup of choice for people who are serious about handling.
Everything comes fully assembled, ready to install, even with the extended top hats. I don't want to take any of it apart.
Price: $800
3) Spoon N1 axle-back muffler for DC2 fitment (like new)
This was purchased brand new from R&D Motorsports in April of 07. I'm the original owner, and it's been mounted only once, on one car. I have not altered it or hacked it up to fit in any way whatsoever. Fits perfectly on a DC, and looks 95% brand new, as the pictures will all show.
The diameter throughout the piping is 2.36" (60mm) which is considered ideal for mostly stock to mildly built NA engines. Not to mention, the very unique and distinct sound that only a legitimate Spoon N1 will provide. The axle-back itself weighs only 8 lbs, which makes a huge weight savings over stock as well.
Price: $325
4) Carsound (Magnaflow) OEM-fitment high flow cat for 94-99 GSR
I purchased this brand new in April of 07. I am the original owner, and it has been mounted only on my Integra. It was a 100% perfect fitment on my 98 GSR, with US-spec header length and US-spec exhaust length. It will fit perfectly on any other 94-99 GSR. I can't guarantee fitment on any other Integra models.
It has an inner diameter of 2" where it meets the header and diameter of 1.75" where it meets the midpipe. Do not be discouraged if you think this is small. I noticed a significant power gain, despite having 2.25" header and 2.36" exhaust. A 2.5" in/2.5" out cat will be VERY loud and more than likely VERY raspy. I have been extremely pleased with the sound and quality of this cat. And you can't beat right out of the box OEM fitment
Price: $75
7) JDM ITR shift boot (black with red stitching)
Like new (like everything else..) and inside of original packaging right now.
Price: $20
8) ARP extended wheel studs for 88-00 Hondas. Set of 16. 8 of them were installed for a few thousand miles, 8 of them are still sealed and unopened.
Price: $40 for all 16 of them.
I will add more things as I find them lying around..
I'm located in Lexington, KY, but I'm willing to drive to Louisville or anywhere in between. Prices are somewhat negotiable. Please don't lowball me or waste my time.
kthxbye
Modified by Rzoops at 6:57 PM 10/7/2007
#4
Honda-Tech Member
Join Date: Oct 2002
Location: BG, KY, United States
Posts: 3,539
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tons of Integra stuff.. 5zigen wheels, lug nuts, Spoon, Kics, Koni Yellow/GC, etc (Rzoops)
If it were just a bit closer to christmas that GC/Koni combo would be mine.
That is exactly what my wife is supposed to be picking up for me this year.
Oh well, BUMP for a fellow KY resident.
That is exactly what my wife is supposed to be picking up for me this year.
Oh well, BUMP for a fellow KY resident.
#6
Honda-Tech Member
Join Date: Oct 2002
Location: NC, US
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tons of Integra stuff.. 5zigen wheels, lug nuts, Spoon, Kics, Koni Yellow/GC, etc (Rzoops)
if you decide to part out the suspension i will be more than happy to take the GC's off your hands! Let me know!
Trending Topics
#8
Honda-Tech Member
Thread Starter
Re: (Rzoops)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rzoops »</TD></TR><TR><TD CLASS="quote">No trades, sorry.</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
EBPSI
Honda Civic / Del Sol (1992 - 2000)
2
11-24-2002 07:06 AM