Progress on my Tein Coilver install and polyurethane bushing install
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: San Diego, CA 92104
Posts: 1,535
Likes: 0
Received 0 Likes
on
0 Posts
Progress on my Tein Coilver install and polyurethane bushing install
Well, still waiting on parts since the more I take things apart, the more parts I end up wanting to replace. Here's my teins that finally came in...this pic shows them assembled using the stock shocks mounts:
and here's some parts that I found out I needed to change after taking things apart -- Lower front ball joints, tie rod ends, and rear control arms (haven't gotten them in the mail yet):
[Modified by 2000Accord5sp, 6:36 PM 11/25/2002]
and here's some parts that I found out I needed to change after taking things apart -- Lower front ball joints, tie rod ends, and rear control arms (haven't gotten them in the mail yet):
[Modified by 2000Accord5sp, 6:36 PM 11/25/2002]
#2
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: San Diego, CA 92104
Posts: 1,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: Progress on my Tein Coilver install and polyurethane bushing install (2000Accord5sp)
oh yea, and here's what things look like right now.
a little empty huh?
a little empty huh?
#3
Member
Join Date: Aug 2001
Location: Innovate...dont imitate, usa
Posts: 1,536
Likes: 0
Received 1 Like
on
1 Post
Re: Progress on my Tein Coilver install and polyurethane bushing install (2000Accord5sp)
oh yea, and here's what things look like right now.
a little empty huh?
a little empty huh?
cant wait to see the finished project.
#4
Honda-Tech Member
Join Date: Aug 2002
Location: Dallas, Tx
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Re: Progress on my Tein Coilver install and polyurethane bushing install (carolinaACCORD)
How much did you get your tien's for? I'm in the process of redoing my suspension. I'm on ground controls w/ kyb agx. I regret going coilover/shock comb, i should have gone with true coilovers
#6
Re: Progress on my Tein Coilver install and polyurethane bushing install (94Accord)
never ridden in a car with full coilovers. i know the spring rates are higher but how is it. how does it compare to the spring shock combo. better be about as many times better as it is times cost
#7
Honda-Tech Member
Join Date: Mar 2002
Location: Im just a Stew Pidasso, OH, USA
Posts: 2,839
Received 0 Likes
on
0 Posts
Re: Progress on my Tein Coilver install and polyurethane bushing install (2000Accord5sp)
While you have all that stuff apart, why not do a rotor/brake upgrade as well ??
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: San Diego, CA 92104
Posts: 1,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: Progress on my Tein Coilver install and polyurethane bushing install (Stew Pidasso)
I wish I could. Having no money is probably the biggest reason. well, the only reason.
I'll eventually be doing that...I'm planning on the low budget legend caliper upgrade with brembo slotted rotors along with steal braded brake lines. Some day...
I'll eventually be doing that...I'm planning on the low budget legend caliper upgrade with brembo slotted rotors along with steal braded brake lines. Some day...
#9
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: San Diego, CA 92104
Posts: 1,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: Progress on my Tein Coilver install and polyurethane bushing install (Alias)
The teins were $980. You can go to http://www.tein.com and look for local dealers in your area. I called several shops and they all quoted me about the same price.
#10
Re: Progress on my Tein Coilver install and polyurethane bushing install (2000Accord5sp)
i coulda done it for $900 flat but anyways... good choice by going with the Teins-you get what you pay for...
Thread
Thread Starter
Forum
Replies
Last Post
Speardog
Honda Civic / Del Sol (1992 - 2000)
4
08-12-2011 03:21 AM
Nicram
Honda Civic / Del Sol (1992 - 2000)
2
04-17-2007 07:54 PM