TAOTAO

iTrader: (1)

Hi All,

I buy EP3 CTR few days ago, together with the car I get WEITEC lowering springs (not install yet) I send email to WEITEC regarding the spring rate and drop, they replay with the rate (the drop will be verify in the beginning of the week).

Now what look to me weird is the rate, see below:

front axle: 20-30 N/mm
rear axle: 50-60 N / mm

I look couple of sites regarding the stock rate, this is what I saw:

Stock ep3.................4.4k f/7.8k r
UKDM/ JDM Stock EP3 Type R (257 / 419.10) Progressive.

I dont know what is right but as I can see (I did the conversion N/mm to K) the WEITEC are more soft then stock ?