Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: El Paso, tx, US
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
Going to drag race . Hoping you all had some insight on how I can get them to work.
Weather it be changing the disc or modifying the bracket or even fitting a gsr caliper. Anyone have any ideas?
Thanks in advance!
Weather it be changing the disc or modifying the bracket or even fitting a gsr caliper. Anyone have any ideas?
Thanks in advance!
#7
Honda-Tech Member
Trending Topics
#9
Honda-Tech Member
Join Date: Apr 2005
Location: castlegar, bc
Posts: 1,303
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
I have noticed that the newer five lug civics have a fairly small rotor/caliper setup. I always wanted to try and put a set on for this exact reason.
#10
Accident Prone
Join Date: May 2010
Location: The runoff of a track near you.
Posts: 2,418
Likes: 0
Received 1 Like
on
1 Post
Re: Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
It's drag racing; you don't need brakes. Save weight and get a parachute instead
[/sarcasm]
I don't know much about drag racing so I can't offer any real advice.
[/sarcasm]
I don't know much about drag racing so I can't offer any real advice.
#11
Honda-Tech Member
Join Date: May 2004
Location: DR. 90210, CA, Breast Man
Posts: 4,517
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
Swap over to a GSR spindle to fit a typical 4 lug 13x8. Then when your done at the track and slicks swap back to your 5 lug spindle.
#12
I said I don't want a title!
Re: Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
So I take it that you don't have an ITR, but you upgraded a normal 'Teg/hatchcrap to a 5-lug ITR setup?
Or am I missing something?
Or am I missing something?
#17
Honda-Tech Member
iTrader: (2)
Join Date: Jan 2009
Posts: 1,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
I have done it to mine. There are multiple ways of doing this. You can buy the front brake kit from keizen speed and it will clear or you can go the cheap route like me I have gsr knuckles gsr calipers re drilled gsr rotors so they are 5 lug and 5 lug hubs.
Last edited by ekcoupeh22; 08-28-2013 at 11:37 AM.
#18
I said I don't want a title!
Re: Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
Nothing bitter old man about building a car correctly rather than putting needless bling parts on it that make your final quest that much more difficult.
Duh.
#20
I said I don't want a title!
Re: Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
Then there is no "easy" way to do it (aka something done in the parking lot in 15 minutes before/after a drag race). Have to get brakes that'll fit under a 13" wheel, which would be something on the lines of an OEM GSR setup. He'll save weight that way, as well.
Just convert it over or run a 15" drag wheel.
Just convert it over or run a 15" drag wheel.
#22
Honda-Tech Member
Re: Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
My advice would be to sell the OEM 5 lug setup and pick up full 4 lug Integra stuff. You will have at least $400 in your pocket and the car will be lighter.
#23
Re: Anybody know how to get a 13x8 wheel on a ITR 5 lug set up.
OP is a perfect example of going for the 5-lug bling when what he really needed was a set of good pads with 4-lug brakes because the car was intended to be a drag car all along. No one buys 13x8's with drag tires just for the heck of it.
Nothing bitter old man about building a car correctly rather than putting needless bling parts on it that make your final quest that much more difficult.
Duh.
Nothing bitter old man about building a car correctly rather than putting needless bling parts on it that make your final quest that much more difficult.
Duh.