Papichulo1767

On a ES2 if i perform a rear disk brake conversion using EP3 parts will i need to use coilovers for a EP3 in the rear to adjust the ride height? I ask because after searching i found nothing on that subject. If ES2 rear coilovers will work after the rear disk conversion will any modification be necessary or will everything bolt right up?

toyomatt84

iTrader: (1)

The lower mounts don't change at all between the EP3, DC5, or any of the 7th Gen. Civic chassis. So, your suspension should match your car's chassis (ES2).

Papichulo1767

Thank you