My ED6 Build
#1
Honda-Tech Member
Thread Starter
My ED6 Build
School is out, and I finally have some downtime. I picked up the car in the
summer of 2010, and originally did not have any plans for it. I just wanted a
solid daily driver. I saw what people were doing to this chassis, and the bug
bit me.
This is when I first got it
Got an eBay catback because my OEM muffler rusted off
Got F&F type 1's
http://www.flickr.com/photos/96593711@N03/8903090977/
Timing belt decided to snap on my home from the store lol
90-91 CRX Lip
B&M dual bend and pwjdm **** (also changed the shifter bushings with energy suspension ones)
F7 control arms and Beaks tie bar (Sway bar coming soon)
Started getting parts while I waited for my tax refund so I could get it painted
More goodies
Went on a badge spree lol
Got some rebuilt calipers as well
Also changed the outer tie rods
New wheel bearing, upper ball joint on the passenger side, and wheel studs
Picked up some eg mats and ek side skirts that I'm no longer gonna use
Haven't used the eg mats yet cause I found these bad boys at the local wrecker
Time to join the fight against cancer
Sent her off for paint in February
How she currently sits
Picked up some 90-91 crx si wheels last week
summer of 2010, and originally did not have any plans for it. I just wanted a
solid daily driver. I saw what people were doing to this chassis, and the bug
bit me.
This is when I first got it
Got an eBay catback because my OEM muffler rusted off
Got F&F type 1's
http://www.flickr.com/photos/96593711@N03/8903090977/
Timing belt decided to snap on my home from the store lol
90-91 CRX Lip
B&M dual bend and pwjdm **** (also changed the shifter bushings with energy suspension ones)
F7 control arms and Beaks tie bar (Sway bar coming soon)
Started getting parts while I waited for my tax refund so I could get it painted
More goodies
Went on a badge spree lol
Got some rebuilt calipers as well
Also changed the outer tie rods
New wheel bearing, upper ball joint on the passenger side, and wheel studs
Picked up some eg mats and ek side skirts that I'm no longer gonna use
Haven't used the eg mats yet cause I found these bad boys at the local wrecker
Time to join the fight against cancer
Sent her off for paint in February
How she currently sits
Picked up some 90-91 crx si wheels last week
Last edited by dopesk8er87; 05-31-2013 at 09:03 AM. Reason: update
Trending Topics
#11
Honda-Tech Member
Re: My ED6 Build
I am loving this, I am going to do an EF as soon as my wife is out of the AF and we move back to the west coast. Wanted an EG, but I think this would be a bit different. Plus, it's going to be pretty much gutted (thinking like a b18/b20 non-VTEC turbo setup)
I am tuned it, looks great!
I am tuned it, looks great!
#12
Honda-Tech Member
Thread Starter
Re: My ED6 Build
I am loving this, I am going to do an EF as soon as my wife is out of the AF and we move back to the west coast. Wanted an EG, but I think this would be a bit different. Plus, it's going to be pretty much gutted (thinking like a b18/b20 non-VTEC turbo setup)
I am tuned it, looks great!
I am tuned it, looks great!
#14
Honda-Tech Member
Thread Starter
#15
Honda-Tech Member
Thread Starter
#18
Honda-Tech Member
Thread Starter
Re: My ED6 Build
http://www.flickr.com/photos/96593711@N03/8869449258/My upper ball joint that I installed 2 months ago decided to back out.
http://www.flickr.com/photos/96593711@N03/8868855007/Decided to order a whole new upper control arm, and also a lower ball joint since it's pretty worm (Moog).
http://www.flickr.com/photos/96593711@N03/8868851753/Put on a bellows boot, which is the last thing my steering rack was missing after I went to town on it during the winter.
http://www.flickr.com/photos/96593711@N03/8869701320/While I'm waiting for the control arm and lower ball joint to arrive, I'm gonna respray the wheel well and paint my knuckle assembly.
http://www.flickr.com/photos/96593711@N03/8868855007/Decided to order a whole new upper control arm, and also a lower ball joint since it's pretty worm (Moog).
http://www.flickr.com/photos/96593711@N03/8868851753/Put on a bellows boot, which is the last thing my steering rack was missing after I went to town on it during the winter.
http://www.flickr.com/photos/96593711@N03/8869701320/While I'm waiting for the control arm and lower ball joint to arrive, I'm gonna respray the wheel well and paint my knuckle assembly.
#20
Honda-Tech Member
Thread Starter
Re: My ED6 Build
Suspension parts arrived
http://www.flickr.com/photos/96593711@N03/8915194821/http://www.flickr.com/photos/96593711@N03/8915810194/Upper control arm and lower balljoint
The quality looks amazing. I still have to re-coat the wheel well and knuckle assembly before I install. I hope to have it done by next Tuesday. Stay tuned!
http://www.flickr.com/photos/96593711@N03/8915194821/http://www.flickr.com/photos/96593711@N03/8915810194/Upper control arm and lower balljoint
The quality looks amazing. I still have to re-coat the wheel well and knuckle assembly before I install. I hope to have it done by next Tuesday. Stay tuned!
#21
Honda-Tech Member
Thread Starter
Re: My ED6 Build
http://www.flickr.com/photos/96593711@N03/8944838370/Started prepping my knuckle assembly today. Gonna finish up tonight then install my lower ball joint and hopefully install it tomorrow.
#24
Honda-Tech Member
Thread Starter
Re: My ED6 Build
http://www.flickr.com/photos/96593711@N03/8953670715/Finally laid some fresh undercoat to my wheel well
http://www.flickr.com/photos/96593711@N03/8954906370/Installed the lower ball joint and laid some fresh paint on the fork
I'm gonna install everything tomorrow and take it for a spin!
http://www.flickr.com/photos/96593711@N03/8954906370/Installed the lower ball joint and laid some fresh paint on the fork
I'm gonna install everything tomorrow and take it for a spin!
#25
Honda-Tech Member
Thread Starter
Re: My ED6 Build
http://www.flickr.com/photos/96593711@N03/8978888857/Haven't had much time to finish because I've been working a lot lately. Plus it's been raining in the great NE. Hopefully finish tomorrow.