Rough idle after Timing Belt Change
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2012
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Rough idle after Timing Belt Change
So a mechanic i know did a timing belt job for me(Water pump and all that with a whole kit.) I picked up the car drove it home, noticed in the morning when i turned it on and let it warm up that at idle i could definitely tell it was louder, and the car itself was shaky. If i put my hands on the steering wheel i can feel the vibration a lot. Now hes going to open it up and make sure everythings all lined up and all that with a timing gun this weekend. Is there anything i can check in the mean time that may cause these symptoms?
PS. It wasnt that way before the job. Thanks for your help HT.
PS. It wasnt that way before the job. Thanks for your help HT.
#2
Honda-Tech Member
Re: Rough idle after Timing Belt Change
If it wasn't like that before then he didn't set the timing marks/balance shaft/crankshaft correctly. Refer him to here: https://honda-tech.com/forums/honda-accord-1990-2002-2/how-replace-timing-belt-timing-balancer-belt-water-pump-f22b1-1908944/
Thread
Thread Starter
Forum
Replies
Last Post