ride hight problems :?
#1
ride hight problems :?
well got some rokkor coilovers (bad choice in my book) butttt if i got them i might as well ride them out alittle, problem is i set them all the same but the car comes out not even ?! ..this is wat i did i put the adjustable stops things at the bottom then turned it 12 1/2 up put it together and put it on the car and lower it but at the end the car is uneven all different hights ..wat am i doing wrong ?! sorry for the read .. thanks
#3
Honda-Tech Member
Re: ride hight problems :?
its a 20+ year old car things distort/move/settle over time could be any number of causes but only one solution decide on the height you want and adjust it accordingly at each wheel
#4
Re: ride hight problems :?
i put the locking nut things on the last set of threads and counted up 12 1/2 .. is that the right or wrong way ? ..thanks ill try that see wat happens
#5
Honda-Tech Member
Join Date: Oct 2006
Location: Gulf Coast, FL, usa
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
Re: ride hight problems :?
Remember that adjusting one corner of car affects the opposite corner (ie LF + RR,etc...)
Also teh weight of driver once seated! Between each adj,ride around to "settle" teh suspension. (Pros recommend best way is on tiles under all 4 wheels-with salt sprinkled in between them to allow them to "slip" on each other-less "riding around settling" that way),meh I just adjust em as needed since I LOVE driving,lol...
Also teh weight of driver once seated! Between each adj,ride around to "settle" teh suspension. (Pros recommend best way is on tiles under all 4 wheels-with salt sprinkled in between them to allow them to "slip" on each other-less "riding around settling" that way),meh I just adjust em as needed since I LOVE driving,lol...
Thread
Thread Starter
Forum
Replies
Last Post