Special thanks to AEM! Bisimoto beta test of prototype DBW 83mm throttle body video
10-21-2011, 08:30 AM
#1
Special thanks to AEM! Bisimoto beta test of prototype DBW 83mm throttle body video
This week Bisimoto and AEM had a break through on a Bisimoto beta test of a custom 83mm drive by wire throttle body that will be used on the upcoming Bisimoto Twin Turbo Porsche 911 project vehicle.
Using an AEM Series 2 EMS as a control unit. This bench test shows the throttle pedal and body calibration, and then actuation of the throttle body. Notice the amazingly quick reponse, and sensitivity. The possibilities are endless: customizable idle, traction, economy/sport mode, boost, valet controls...you name it! This same system can also be implemented into any vehicle! Stay tuned for future updates.
Special thanks to John Nguyen and AEM!
http://www.youtube.com/watch?v=QqSh6YszNKI
Using an AEM Series 2 EMS as a control unit. This bench test shows the throttle pedal and body calibration, and then actuation of the throttle body. Notice the amazingly quick reponse, and sensitivity. The possibilities are endless: customizable idle, traction, economy/sport mode, boost, valet controls...you name it! This same system can also be implemented into any vehicle! Stay tuned for future updates.
Special thanks to John Nguyen and AEM!
http://www.youtube.com/watch?v=QqSh6YszNKI
Last edited by Julio@Bisimoto; 10-21-2011 at 11:45 AM.
Thread
Thread Starter
Forum
Replies
Last Post
*JDM*Ej8*
For Sale
2
07-03-2018 06:21 AM
Julio@Bisimoto
Forced Induction
0
10-21-2011 08:28 AM
