Civic wago rt4wd question
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Location: Claremont NH
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Civic wago rt4wd question
hey all have a quick question about the rt4wd wago, well im planing on swaping a z6 into my wago that is 4wd and noticed that the 4wd tranny uses a half shaft while non 4wd tranny dont, also noticed the z6 doesnt have the bolt holes on the block for the haftshaft, so i was thinking in order to use the z6 id have to get a normal longer driver side axle from a normal d series, i no the axle spines are bigger but my questiuon is if anyone has swaped the splines off the 4wd axle to the longer d sieres axle? do you think that axle would be able to hold the extra torque of the 4wd? any input would be appectaited
#2
Honda-Tech Member
Join Date: Aug 2009
Location: RENO, NV
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Re: Civic wago rt4wd question
the long axle won't clear the "transfer case" the z6 should have the bolt holes, and they'll be threaded. if not, you just gotta find one that does.
Thread
Thread Starter
Forum
Replies
Last Post