ndccpf1

2003 Acura TL Type-S

Replaced driver side HID ballast/igniter last year

Now driver Low (HID) / High (9005) beams not working

With engine off, using flash-to-pass causes passenger low AND high to come on

With car running and passenger low (HID) on turning on FOG lights will cause FOGS to be on for a few seconds then go off and this will cause the high beams (9005s) to both come on DIM

Driver side HID bulb is good

Scratching my head..

wilp99

sounds like something is wrong with the fog light switch. have you messed with any switches?

awthentik83

did you ever find out a solution to this problem? my 2002 Acura TL headlight is doing the same thing and it started smoking when i changed the bulb. Also my LOWER fog lamps are not working as well. Inside the dashboard in the car, the high beam icon wont even light up with the high beams are on. Any help would be greatly appreciated.

ndccpf1

The car went to the local mechanic where he cleaned are reseated some harness wiress leading the headlights and to the fog lights. All has been good since.