dpfi to mpfi and obd0 to obd1 help, No harness
#1
Honda-Tech Member
Thread Starter
dpfi to mpfi and obd0 to obd1 help, No harness
Ok, so Ive done the whole dpfi to mpfi and obd0 to obd1, twice already. BUT now i no longer have the original chassis harness for this car. And I've been searching for hours. So Im stuck. My questing is, Where are all these wires located at the ecu side?...Things like the dizzy wires, TPS, and EACV. Everything else I can figure out later.
#2
Re: dpfi to mpfi and obd0 to obd1 help, No harness
Thank god my ef was already converted to mpfi before I bought it lol....hope you get it figured out, I heard it makes a hella good difference
#4
Honda-Tech Member
Re: dpfi to mpfi and obd0 to obd1 help, No harness
All the wires come out of the firewall on the ECU side from the underdash harness on the passenger side of the car. If I have read what you are asking correctly. If not try to be more specific? Are you missing the engine harness then for the motor or you don't have the underdash harness anymore?
#5
Honda-Tech Member
Thread Starter
Re: dpfi to mpfi and obd0 to obd1 help, No harness
Sorry for the mix up. I dont have the engine harness. The ECU plugs are still there, I just dont have the Original Engine harness from the car.
Thread
Thread Starter
Forum
Replies
Last Post
88_hatch_ls
Honda CRX / EF Civic (1988 - 1991)
56
09-18-2013 01:51 PM
psychadelicfreedom
Honda CRX / EF Civic (1988 - 1991)
4
07-02-2005 11:22 PM