My 1994 Integra RS.. slooww build-up *updated* 07/2016
#203
Re: My 1994 Integra RS.. slooww build-up *updated* 04/2013
Still waiting on my block to get back from Dan Benson Racing, but got some more parts in the mail.. I'm building a 84mm sleeved 9:7:1 cr type R engine.
CP pistons, Eagle rods, full Supertech valvetrain, Supertech dished valves, Gates racing timing belt, All new OEM Honda seals/gaskets & ChaseBays CM2 harness w/mil spec connector.
Also picked up some RE11's to go on the se37's
CP pistons, Eagle rods, full Supertech valvetrain, Supertech dished valves, Gates racing timing belt, All new OEM Honda seals/gaskets & ChaseBays CM2 harness w/mil spec connector.
Also picked up some RE11's to go on the se37's
#205
Re: My 1994 Integra RS.. slooww build-up *updated* 04/2013
Sorry for the delay and updates.. There haven't been many. I've been saving money and trying to get everything going.. I just got the block on the engine stand and should be assembling very soon.
Thanks to Dan Benson for the sleeves. 84mm type R
Thanks to Dan Benson for the sleeves. 84mm type R
#208
Re: My 1994 Integra RS.. slooww build-up *updated* 04/2013
I've just been saving money and trying to get something going... I need a clutch kit, Hondata s300, thermal throttle body/intake manifold gasket, 36mm axles and a few other things...
Here are some progress pics
Here are some progress pics
#209
Re: My 1994 Integra RS.. slooww build-up *updated* 04/2013
I came across a gnarly deal on some recaros from my buddy jon, so i have him my usdm itr seats + cash for these...
Also I wanted to make more power than I had originally planned, I parted ways with my log manifold/recirculated dump combo from Go-Autoworks and wanted a ramhorn type manifold I could keep my power steering with, so I got that stuff from Blueridge motorsports... While I was at it, I went ahead and had them V-band my turbo and all that good stuff... It's a specialty turbo from Go-Autoworks (6157) Both are great companies to deal with
Also I wanted to make more power than I had originally planned, I parted ways with my log manifold/recirculated dump combo from Go-Autoworks and wanted a ramhorn type manifold I could keep my power steering with, so I got that stuff from Blueridge motorsports... While I was at it, I went ahead and had them V-band my turbo and all that good stuff... It's a specialty turbo from Go-Autoworks (6157) Both are great companies to deal with
#217
Re: My 1994 Integra RS.. slooww build-up *updated* 04/2013
Thank you sir, it's fading and going to need to be resprayed soon
Just spending money on it when I can, I'm running out.. Haha
If miracles can happen... I hope so man!
I've owned a couple of cars through out the years, but I have held on to this one the longest and have invested everything all into this one car..
I've worked on cars all of my life and recently started working in Law Enforcement.
If miracles can happen... I hope so man!
I've worked on cars all of my life and recently started working in Law Enforcement.
#221
Re: My 1994 Integra RS.. slooww build-up *updated* 04/2013
Thanks man.
My buddy shawn, which is my engine builder is also helping me fabricate all of the brake lines... we took metal coat hangers and straightened them out and the mocked them up and FINALLY got them how we liked and dropped them off at a local hose company. We had the lines made and double flared with the fittings on them..
We are finally starting to put some stuff back in the bay.. I upgraded to a 1'' master cylinder as well.... Just got my skunk 2 thermo intake manifold gasket in the mail not long ago and we'll get that installed too.
Here is a progress pic
My buddy shawn, which is my engine builder is also helping me fabricate all of the brake lines... we took metal coat hangers and straightened them out and the mocked them up and FINALLY got them how we liked and dropped them off at a local hose company. We had the lines made and double flared with the fittings on them..
We are finally starting to put some stuff back in the bay.. I upgraded to a 1'' master cylinder as well.... Just got my skunk 2 thermo intake manifold gasket in the mail not long ago and we'll get that installed too.
Here is a progress pic
#222
Honda-Tech Member
re: My 1994 Integra RS.. slooww build-up *updated* 10/2014
Looks good, Im not knocking you when I say I see you used eagle rods and CP pistons, like is that all there really is or are they just that popular that everyone uses them? just wondering I havent decided on what I wanna buy when I get a block to rebuild.