Need wiring help!(have pics)
#1
Junior Member
Thread Starter
Join Date: Apr 2008
Location: tilden, il, usa
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Need wiring help!(have pics)
Ok so i got a 1988 honda crx, about a month ago runs ok,,, symptoms hard starting when cold or sitting for a while and cuts out while in higher rpms , some times it happens some times it dont. It is a d16a6 with mpfi setup I have replaced fuel filter ,fuel pump, regulator adjustable with gauge. dizzy cap, throttle body, and have added 2.25 exhaust. But my guestions is what are these wires for ,, They are on the driver side right above the resistor box hook up the wires come off the main harness and run into the cab. The wires that are cut run along with the wires that run into the cab but as u can see the wires are no longer there or maybe were never there. Not sure if the guy did a swap with intakes and didnt complete it all the way or what any help is useful thanks in advance JT .
#2
Junior Member
Thread Starter
Join Date: Apr 2008
Location: tilden, il, usa
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
#3
Junior Member
Thread Starter
Join Date: Apr 2008
Location: tilden, il, usa
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need wiring help!(have pics) (jtmoney2002)
there is the pic above ,the colors of the wires are black and yellow and blue with yellow dots on them
#5
Honda-Tech Member
Re: Need wiring help!(have pics) (jtmoney2002)
Check my sig...he has diagrams for everything and it's $1...i'm trying to tell everyone because sometimes you can't the right stuff on here and he has it all
Goodluck
Goodluck
#7
Honda-Tech Member
Re: Need wiring help!(have pics) (jtmoney2002)
$1 for copy written material. How long has he been getting away with this?
OP, Your best bet would be to buy a Helms manual, or shop manual. That's what I did and it has come in handy on more than a dozen occasions.
PM sent...
Modified by GhostAccord at 9:54 AM 5/28/2008
Trending Topics
#8
Honda-Tech Member
Re: Need wiring help!(have pics) (GhostAccord)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GhostAccord »</TD></TR><TR><TD CLASS="quote">
$1 for copy written material. How long has he been getting away with this?
OP, Your best bet would be to buy a Helms manual, or shop manual. That's what I did and it has come in handy on more than a dozen occasions.
PM sent...
</TD></TR></TABLE>
Apperently a long time. I guess its the same thing at finding a diagram on here, but since some stuff is not always on here, he charges to get it for you. Worked for me in the past on many occasions.
But of course a shop manual is handy
$1 for copy written material. How long has he been getting away with this?
OP, Your best bet would be to buy a Helms manual, or shop manual. That's what I did and it has come in handy on more than a dozen occasions.
PM sent...
</TD></TR></TABLE>
Apperently a long time. I guess its the same thing at finding a diagram on here, but since some stuff is not always on here, he charges to get it for you. Worked for me in the past on many occasions.
But of course a shop manual is handy
#9
Honda-Tech Member
Re: Need wiring help!(have pics) (PLAN:B)
Yes it is incredible how incompetent some folks are at using the internet. And how fast they will spend $1. In the end that 1 dollar after the banks/paypal/credit card companies get done with it actually cost you $5. For free information :headshake:
Too each his own I guess!
Too each his own I guess!
Thread
Thread Starter
Forum
Replies
Last Post
crxaddikt
Honda CRX / EF Civic (1988 - 1991)
2
06-23-2017 05:08 PM