CrackerD16z6

This post has been updated to reflect the progress of the thread.


If any of you guys are interested - we're ready to sell the mats we used for the pictures you see at the top of the first page. Normally these mats with logos would cost almost $75 (including shipping). They're still 100% new - just been sitting in the office in case we needed some more pics. Let me know if you're interested - they're $50 a set shipped. Thanks again to all of you guys for chipping in to help!

4 Door Mats - SOLD

2 Door Maroon with White Edging and Italic "Civic" Logos - $50 Shipped

Not exactly RED like I was hoping ... kinda maroon

2 Door Black with Yellow "Civic: logos - $50 Shipped



Hey Guys - they're finally done! Here's some pic goodness for you:



Not exactly RED like I was hoping ... kinda maroon



Got them posted up on the website for you here:
http://www.dstuning.com/OEM-Ac...s.asp


We did finally find the correct 4G Civic logo and are working on that right now. We should be able to make mats for the 4G 2DR and 4DR by the end of this month. When they're ready we'll post them with some pics for you guys here:
http://www.dstuning.com/OEM-Ac...s.asp

We DO still need an old trunk mat from a 2DR and a 4DR so that we can get those templates for you. Let me know if you guys can find one. I've got a couple guys checking the junkyards, but so far no luck. If anyone has a trunk mat that we can use for templates just let me know and we'll take care of you!


Just for Reference - we're all trying to make sure none of you guys have an odd floor mat template that we'll need to consider. As it stands now the templates for our mats are going to exactly match the mats shown in these pictures. If your logo on your mats differs or if your mats are cut out differently LET US KNOW!

4G Logo:


2 Door Mats:



4 Door Mats:


6.19.07 Update
Hey Guys, Logos are done. We should have our first set of mats here for pics in about a week. We'll keep you updated.
Here's some logo pics:





Modified by CrackerD16z6 at 11:05 PM 6/19/2007


Modified by CrackerD16z6 at 2:01 AM 7/3/2007


Modified by CrackerD16z6 at 2:07 AM 7/3/2007


Modified by CrackerD16z6 at 5:12 AM 10/15/2007


Modified by CrackerD16z6 at 5:13 AM 10/15/2007

EF_LSVtec

Why would you need an extra clear digital image of the logo when you're only using it on a floomat? Besides, that logo is not that complicated...you could probably make one from scratch or hire an artist.

firebane

holy shat dude.. if you seriously make these for the 4g civics I'll be ordering a set pronto!

88crxvtec

http://www.brandsoftheworld.co...49431

Looks to me you could just enlarge the v the put the slash in it.

CrackerD16z6

Thanks for that link - we actually already have that logo digitized - but it's for some later model Civics. While I agree putting the slash in there would be CLOSE to OEM. We really want it to be exactly like OEM. Man I've looked everywhere for this and cannot find it. If you guys know the OEM Honda part number for an OEM sticker I would be able to use that too ...

CrackerD16z6

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF_LSVtec &raquo;</TD></TR><TR><TD CLASS="quote">Why would you need an extra clear digital image of the logo when you're only using it on a floomat?</TD></TR></TABLE>


We need a digital image because we're having the factory Digitize a logo for the mats. The logos are sewn directly into the mats with very high quality embroidery - so if I dont have a decent file for them to work with - then the logo wont be good quality either

EFinawesomeman

just take a close up picture of your on 4g civic with a good camera. or just google it.

CrackerD16z6

Unfortunately I dont own one - and I've honestly been Googling all day long trying to find one

firebane

I'll take one later for you

CrackerD16z6

Hey guys thanks for the time and trouble - I finally found something that should work. For you 4G guys this is actually some pretty interesting stuff:
http://www.civic4g.pl/forum/topics1/53.htm

This one looks OEM


This one looks .... cooler.



Any preferences that you 4G Guys have?

firebane

Use this and just fill in the lines as it looks like the proper one and is the best.. best to stick with whats original and match the rest.

http://img395.imageshack.us/my...n.jpg

CrackerD16z6

I agree with you Fire - except I cannot actually find that logo in use anywhere on the body of the vehicle.

Just to put everyone on the same page - FireBane is describing this here:


Is that a correct logo?

Should we do that one as well as this one?

firebane

heres what the original looks like.. sorry for bad quality.

CrackerD16z6

No that's perfect - so this one I have here should work right?




I just want to be sure I get this done right the first time. The factory charges us $100 each time we have them digitize a new logo into their Embroidery machine

firebane

yes that last one should work and color would be best with black/grey floormat and white lettering.

RSZero1

Nice products, i will be ordering a set from you soon for my CRX. Just ordered some shifter bushings today.

CrackerD16z6

Great - thanks for all the input. We'll get these 4th Gen mats cooked up

D16Z6racing

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CrackerD16z6 &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

My fav.

My sedan has the originals in it still....283k....I'll need some new mats soon too.

CrackerD16z6

Sounds good, thanks for the input. I've already sent that exact file over to the factory to work with. It'll take them about a week to wrap that up.

We already have the templates done - just need to pull together a completed set for pics and we're ready to go.

dr_latino999

~Cough~ Grey ~Cough~

Could you PM me an expected price?

~Cough~ Grey ~Cough~

~Cough~ Grey ~Cough~

~Cough~ Grey ~Cough~

~Cough~ Grey ~Cough~

EFinawesomeman

might as well make them in several basic colors like black, grey, and red.

Crx Jimmy

make some black CRX ones as well

rbwdriven

you could talk with Matworks in GA. They aleady do it for a civic. They did mine. Call and speak to them. Real nice guys. Plus the owner is a massive gearhead, just finished a 67 mustang gt500.

Marine grade material and will not fade.

I've got them in my civic, lude and rex. Helps that the wife use to work there and left on good terms.

aarontrini85

make some crx ones to and shoot me a price on the pair of front floor mats

bobjohnson

Go to his site, theres already black CRX ones.