*SoHonda_Garage NA EH2 build thread*
12-01-2006, 09:41 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
*SoHonda_Garage NA EH2 build thread*
So I finally got to retire the hatch for this season today. I got real lucky that we havent had any bad weather here in NY yet. today it was 72 degrees out and had some crazy *** thunder and lightning storms... f'in crazy. anyway, ive got a bunch of plans for the hatch over this winter, lots of interior/chassis/bay paint, bottom end rebuild, full wire tuck and lots more.
i was able to get a little done tonight, picked up an Autopower roll bar for 120 bucks
off B18CJDMGSR
but it needs some major cleaning up. the extra cross bar was welded on kinda shitty, strong but slag everywhere so i decided to start cleanin it up.
BEFORE
AFTER (not done yet)
me and Knappster also did a little winterizing on his hatch
out with the new and in with the old....
BEEFY
dont mind the dirtiness.... its been a week of straight RAIN
i know its kinda boring but im bored and was excited to get the thread up and running... hopefully ill be able to get alot more done by monday
Modified by SoHonda_Garage at 9:32 PM 12/2/2006
i was able to get a little done tonight, picked up an Autopower roll bar for 120 bucks
off B18CJDMGSR
but it needs some major cleaning up. the extra cross bar was welded on kinda shitty, strong but slag everywhere so i decided to start cleanin it up.BEFORE
AFTER (not done yet)
me and Knappster also did a little winterizing on his hatch
out with the new and in with the old....
BEEFY
dont mind the dirtiness.... its been a week of straight RAIN
i know its kinda boring but im bored and was excited to get the thread up and running... hopefully ill be able to get alot more done by monday
Modified by SoHonda_Garage at 9:32 PM 12/2/2006
12-01-2006, 09:44 PM
#3
Honda-Tech Member
Join Date: Oct 2004
Location: Rhode Island
Posts: 5,749
Likes: 0
Received 0 Likes
on
0 Posts
Re: *SoHonda_Garage NA EH2 build thread* (SoHonda_Garage)
w00t w00t for our winter parts collecting and builds, My tranny should be an interesting adventure ...... 
for my car looking like ****. Though its not as bad as i thought it was gonna be riding on the stock suspension again
for our winter parts collecting and builds, My tranny should be an interesting adventure ...... for my car looking like ****. Though its not as bad as i thought it was gonna be riding on the stock suspension again
12-01-2006, 09:46 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: (NMZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NMZ »</TD></TR><TR><TD CLASS="quote">COOL
how did you shave the imperfect welds?</TD></TR></TABLE>
cutoff wheel... its all i really have thatll get through it. went through a whole wheel on one side and didnt even finish yet. time to hit up lowes for some supplies
how did you shave the imperfect welds?</TD></TR></TABLE>
cutoff wheel... its all i really have thatll get through it. went through a whole wheel on one side and didnt even finish yet. time to hit up lowes for some supplies
12-02-2006, 08:33 AM
#5
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: (SoHonda_Garage)
a pic of some of the lightning from last night... you cant really tell but it was lighting the sky up carzy purple a blue.... happy december lol 
Modified by SoHonda_Garage at 1:14 PM 12/2/2006
Modified by SoHonda_Garage at 1:14 PM 12/2/2006
12-02-2006, 09:15 AM
#7
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: *SoHonda_Garage NA EH2 build thread* (A_P_1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by A_P_1 »</TD></TR><TR><TD CLASS="quote">You're gonna keep the single cam?!
</TD></TR></TABLE>
thats knappster's car... mines the black egg (NA EH2 build)
but yeah, hes keeping the single cam non vtec.... were going to be putting a final drive in it sometime this winter.... it should be good for keeping up w/ stock b16 hatches
Modified by SoHonda_Garage at 2:54 PM 12/2/2006
</TD></TR></TABLE>
thats knappster's car... mines the black egg (NA EH2 build)
but yeah, hes keeping the single cam non vtec.... were going to be putting a final drive in it sometime this winter.... it should be good for keeping up w/ stock b16 hatches
Modified by SoHonda_Garage at 2:54 PM 12/2/2006
Trending Topics
12-02-2006, 09:59 AM
#10
Honda-Tech Member
Join Date: Apr 2005
Location: FiveThreeOhhh
Posts: 6,854
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SoHonda_Garage)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by waddy41 »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
</TD></TR></TABLE>
12-02-2006, 10:55 AM
#13
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: (squashman702)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by squashman702 »</TD></TR><TR><TD CLASS="quote">You must be pretty close by Syracuse, we saw almost exactly the same weather.</TD></TR></TABLE>
about 3 hrs south... but i think like the whole stae got the same weather yesterday
about 3 hrs south... but i think like the whole stae got the same weather yesterday
12-02-2006, 03:53 PM
#17
Honda-Tech Member
Join Date: Dec 2005
Location: New York, ny, usa
Posts: 2,124
Likes: 0
Received 0 Likes
on
0 Posts
I hope your not going to have that as a functional cage where it needs to be inspected because the #1 thing with rollcages r the welds have to be visable
12-02-2006, 05:28 PM
#20
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: (mrbigg9032)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrbigg9032 »</TD></TR><TR><TD CLASS="quote">I hope your not going to have that as a functional cage where it needs to be inspected because the #1 thing with rollcages r the welds have to be visable</TD></TR></TABLE>
no no the only tracking ill be doing around here is HPDE's and possibly time attack through NASA. neither requires a cage. i just got it so i car run my harnesses over it when i get them... and for a little bit of chassis stiffening
no no the only tracking ill be doing around here is HPDE's and possibly time attack through NASA. neither requires a cage. i just got it so i car run my harnesses over it when i get them... and for a little bit of chassis stiffening
12-02-2006, 05:29 PM
#21
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: (John Cutter)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by John Cutter »</TD></TR><TR><TD CLASS="quote">
I need to stop looking at these threads though, they make me want to rethink selling my car. lol</TD></TR></TABLE>
i noticed in your sig you have the F2 coilovers.... how do you like them? im planning on geting a set, but im wondering about how long they last before they need re-valveing
I need to stop looking at these threads though, they make me want to rethink selling my car. lol</TD></TR></TABLE>
i noticed in your sig you have the F2 coilovers.... how do you like them? im planning on geting a set, but im wondering about how long they last before they need re-valveing
12-03-2006, 09:26 AM
#22
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: (SoHonda_Garage)
got some more done on the rollbar last night, finished cleaning up the welds with the cutoff wheel, dremel, and sandpaper, then sanded the rest of it to get it ready for paint
Longnecks FTW!
then this morning i brought it inside for a nice grey coat of paint
gonna start rippin out the interior of the hatch today and mock up the rollbar
also might get the engine out tonight
Longnecks FTW!
then this morning i brought it inside for a nice grey coat of paint
gonna start rippin out the interior of the hatch today and mock up the rollbar
also might get the engine out tonight
12-03-2006, 10:17 AM
#25
Honda-Tech Member
Thread Starter
Join Date: Dec 2003
Location: True Honda Enthusiast
Posts: 12,680
Likes: 0
Received 1 Like
on
1 Post
Re: (jdmdc2gsr)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmdc2gsr »</TD></TR><TR><TD CLASS="quote">Looks great
But a big for NY winters 
</TD></TR></TABLE>
thanks man, you take your car off the road for the winter right?
But a big
for NY winters </TD></TR></TABLE>thanks man, you take your car off the road for the winter right?