DB Squad.....for the Teggers with 2 extra doors
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2005
Location: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Posts: 9,716
Likes: 0
Received 3 Likes
on
3 Posts
Re: DB Squad.....for the Teggers with 2 extra doors
I got to give you credit. I could not ride that low. I threw the 16 blitz on with out rasing the car when it was dumped from the ls mesh and wow. The ride is crazy. I got stuck trying to get into a gas station and 4 people had to help me lift the the car. Never again.
This is the picture when I got stuck and at this height. I give you major props. Can you put people in the back?
This is the picture when I got stuck and at this height. I give you major props. Can you put people in the back?
Honda-Tech Member
Join Date: Oct 2006
Location: san jose, ca, usa
Posts: 13,511
Likes: 0
Received 0 Likes
on
0 Posts
Re: DB Squad.....for the Teggers with 2 extra doors
Yea i can put people in the back it actully has a 5 cu ft box in the trunk ..I never get stuck anywhere..I have to drive over 4 large bumps to get out of my complex...Man at the height you were at i would have been able to drive cross country ..lol
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2005
Location: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Posts: 9,716
Likes: 0
Received 3 Likes
on
3 Posts
Re: DB Squad.....for the Teggers with 2 extra doors
I can't wait to see your car in person. I am on tein flex. Maybe to soft? My piping is bent to shyt. I am also worried when I go to install my turbo setup. 3 inch pipping and my down pipe. I would cry if I fubar that.
Honda-Tech Member
iTrader: (2)
Join Date: Oct 2007
Location: Denmark.
Posts: 19,402
Likes: 0
Received 0 Likes
on
0 Posts
Re: DB Squad.....for the Teggers with 2 extra doors
Apathy idk they scrape but i just pull the shredded pcs of the splash guards when they show..lol and no nothing is modified to take the stress for being low it just takes a beating .Of course things brake and need to be replaced more often but its the price you pay i guess..
Hmm how's your ride quality considering you're on stock parts? I would think aftermarket ball joints from Buddy Club or Blox would improve the steering on the slammed knuckles or stiffer bushings in the rear trailing arms would have lift the rear wheels smoothly...?
Anybody else have input on improvements for a slammed height?
I got to give you credit. I could not ride that low. I threw the 16 blitz on with out rasing the car when it was dumped from the ls mesh and wow. The ride is crazy. I got stuck trying to get into a gas station and 4 people had to help me lift the the car. Never again.
Maybe you took it at the wrong angle or straight on?
Re: DB Squad.....for the Teggers with 2 extra doors
my fs thread if you guys need anything I'll bring the prices lower than what they are already
Only thing not posted is car cover I'll take 200 shipped
http://forums.nwp4life.com/zerothread?id=28758
Only thing not posted is car cover I'll take 200 shipped
http://forums.nwp4life.com/zerothread?id=28758
HT Black OPs
iTrader: (1)
Join Date: Jun 2004
Location: AZ, USA
Posts: 3,161
Likes: 0
Received 0 Likes
on
0 Posts
Re: DB Squad.....for the Teggers with 2 extra doors
Cleaned my neglected headlights yesterday
Got this in the mail, need ideas of mounting plz (jdm front)
Got this in the mail, need ideas of mounting plz (jdm front)
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: DB Squad.....for the Teggers with 2 extra doors
Replace your bushings....If you haven't already.
Clock your bushings after you set your ride height
Run as much rubber as you possibly can on your wheels
Drive slow and pay attention to the road.
Drive on routes you know well to avoid surprises
Clock your bushings after you set your ride height
Run as much rubber as you possibly can on your wheels
Drive slow and pay attention to the road.
Drive on routes you know well to avoid surprises
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Left Coast : High Altitude, Top Floor
Posts: 7,616
Likes: 0
Received 1 Like
on
1 Post
Re: DB Squad.....for the Teggers with 2 extra doors
Covercraft multibond or Block it 380....Both can be custom fit ordered for your car under $170. I have the multibond for the x5 and Block it 380 for the Integra.
Honda-Tech Member
iTrader: (5)
B*a*n*n*e*d
Join Date: Jan 2011
Location: been here since 2005
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
Re: DB Squad.....for the Teggers with 2 extra doors
I'm looking for some new rims for my DB8. I don't have the turbo b anymore so I don't need to run drag radials all the time and I'm looking at 16's or 17's since the 15's were too small. Right now I am liking either 16" Volk CE28N, 16" Spoon SW388 or 17" Work Meister. What do you guys think?
16" Sw388s would look awesome on your color.
I had 16" work Meister S1's on 205/45/16s and they fit perfect. There is a guy in the marketplace selling 17" work meister. Infamousavi is selling his 16" full polished Work Meister S1s aka my old set
Honda-Tech Member
Join Date: Oct 2006
Location: san jose, ca, usa
Posts: 13,511
Likes: 0
Received 0 Likes
on
0 Posts
Re: DB Squad.....for the Teggers with 2 extra doors
Drives fine the only isues i have are that the A arms are sitting up on the shock towers..Other than that its a pretty smooth ride .I do focus more on the roads in the teg due to living in a city with some of the worst roads in america ,but i get around just fine..And am still able to drive aggresive that low...Took it to the beach this past weekend had to drive threw the moutains and we were smashing..lol
Honda-Tech Member
Join Date: Apr 2004
Location: Winnipeg, MB
Posts: 1,040
Likes: 0
Received 0 Likes
on
0 Posts
Re: DB Squad.....for the Teggers with 2 extra doors
16" Volks are going to be 8 spoke and look like **** compared to 10 spoke.
16" Sw388s would look awesome on your color.
I had 16" work Meister S1's on 205/45/16s and they fit perfect. There is a guy in the marketplace selling 17" work meister. Infamousavi is selling his 16" full polished Work Meister S1s aka my old set
16" Sw388s would look awesome on your color.
I had 16" work Meister S1's on 205/45/16s and they fit perfect. There is a guy in the marketplace selling 17" work meister. Infamousavi is selling his 16" full polished Work Meister S1s aka my old set
Honda-Tech Member
iTrader: (9)
Re: DB Squad.....for the Teggers with 2 extra doors
I got to give you credit. I could not ride that low. I threw the 16 blitz on with out rasing the car when it was dumped from the ls mesh and wow. The ride is crazy. I got stuck trying to get into a gas station and 4 people had to help me lift the the car. Never again.
charming! .... you know who's 2nd in line if the 1st buyer flakes
Re: DB Squad.....for the Teggers with 2 extra doors
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2005
Location: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Posts: 9,716
Likes: 0
Received 3 Likes
on
3 Posts
Re: DB Squad.....for the Teggers with 2 extra doors
I had to find rims that no one was using. Everyone had cpr, mugens, rotas. Searched and these did not come up. Plus there 16's and 4x100. Hard to find. Thanks to franky @ gspot automotive.
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2007
Location: West Palm Beach Florida
Posts: 1,246
Likes: 0
Received 1 Like
on
1 Post
Re: DB Squad.....for the Teggers with 2 extra doors
Thanks everyone!
Cars looking good killer!
Apathy how'd you find those?
Can't wait to clay n wax this bitch for another one
Cars looking good killer!
Apathy how'd you find those?
Can't wait to clay n wax this bitch for another one