1997 Honda Accord 2.7L V6 Code P1361
#1
1997 Honda Accord 2.7L V6 Code P1361
P1361 tdc sensor intermittent interruption CEL on no flashing just solid on. I looked this up says its a crank positions sensor.
Car starts, runs and drives, cold it sputters a bit then smooths out on acceleration. If i try to go over 3500 RPM it starts buckin like a donkey with a finger shoved up its butthole
The internet is very vauge about acccord V6 models i cant find any viable info, not even any videos on Youtube.....on how to get to the crankshaft postion sensor.
I assume its behind the timing cover i found a harness connector going down towards the crank.
So i got the right idea or is it the distributor? ive read many dif things but nothing consistant. Any help or direction appreciated
Car starts, runs and drives, cold it sputters a bit then smooths out on acceleration. If i try to go over 3500 RPM it starts buckin like a donkey with a finger shoved up its butthole
The internet is very vauge about acccord V6 models i cant find any viable info, not even any videos on Youtube.....on how to get to the crankshaft postion sensor.
I assume its behind the timing cover i found a harness connector going down towards the crank.
So i got the right idea or is it the distributor? ive read many dif things but nothing consistant. Any help or direction appreciated
Thread
Thread Starter
Forum
Replies
Last Post
jetlife
Honda Accord (1990 - 2002)
8
10-19-2014 02:10 AM