DJs Build
#26
Fish Twig
Join Date: Nov 2005
Location: Still hunting that foo up there
Posts: 15,555
Received 309 Likes
on
285 Posts
Re: DJs Build
This weekend got an alarm install on an 07 tacoma, following week transmission flush, week after that the water pump, flush and serpentine belt and then I have free time.
#28
Honda-Tech Member
Thread Starter
Join Date: Feb 2014
Location: Houston, Texas
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Re: DJs Build
ordered some lowering springs, and hit up boomslang about the vafc harness, they said get the 99 accord auto harness and it fits the crv's... so now debating on if i should go ahead and get the vtec working now too... might as well...
#31
Honda-Tech Member
Thread Starter
Join Date: Feb 2014
Location: Houston, Texas
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Re: DJs Build
yeah auto looks like the best bet is vafc, i plan on getting one, my car already has everything to vtec except that...after i get the vafc and turbo the v ill be saving up and researching how to do a j swap into it and try to keep awd in it... but i may just give up after the turbo goes on, i just want a little more power than the b20 is giving me right now
#32
Honda-Tech Member
Thread Starter
Join Date: Feb 2014
Location: Houston, Texas
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Re: DJs Build
got some new pics after lowering my V on no name $55 accord sleeves off ebay with my stock (pretty much gone) struts... i lowered it too much one weekend for a car show and now the struts are done for sure, time to get either new struts or go ahead and buy some d2's or yonaka 1 piece coilovers... i had it lowered to were i couldnt even fit a finger in between any of the tires and the fenders, heres some pics i took after raising back up...now its down a little more than the pics show...
#33
Fish Twig
Join Date: Nov 2005
Location: Still hunting that foo up there
Posts: 15,555
Received 309 Likes
on
285 Posts
Re: DJs Build
I'm sure you can use the ek j swap mounts but if you plan to keep it auto than you'll need to make a custom mount for the tranny. To keep it awd than thats going to cost a big more. I'm not sure how the acura rl awd system works, or even if its the same as the crv awd system.
#34
Honda-Tech Member
Thread Starter
Join Date: Feb 2014
Location: Houston, Texas
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Re: DJs Build
havent found any info on it when i was looking, right now im putting the swap on hold for a while, but it will happen eventually, hopefully in the next year or 2, may just swap it in with fwd for now to make things easier, or just H2B swap(5sp) either way itll be enough power to move the crv more than what it does now...
Thread
Thread Starter
Forum
Replies
Last Post