Upper control arm hardware
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2011
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Upper control arm hardware
I'm in the process of installing my Energy Suspension bushing kit and when I pulled my upper control arm off I noticed that the hardware that holds the control arm to the car wasn't a round shape but instead was more of a rectangle.
These are the parts that I need since they are round and the bushing will actually fit in them. Anyone know of where I can just order the hardware instead of the whole control arm?
These are the parts that I need since they are round and the bushing will actually fit in them. Anyone know of where I can just order the hardware instead of the whole control arm?
#2
Honda-Tech Member
Join Date: May 2014
Location: easley s.c.
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Re: Upper control arm hardware
sounds like someone put some aftermarket pieces on there. ive seen some that are rectangular in shape... skunk2 or something like it. adjustable? anyway, you can find them all day long on amazon.
upper control arm links, I think that's what they are called. idk for sure with out looking at my repair manual.
even better and cheaper would be... go to the pick your part and yank some off of just about any civic or integra. I could be wrong but most all 90's Hondas with double wishbone suspension used them up front. there is a strip of metal that connects them, which could be a different length for larger and smaller vehicles. other than that I think they are the same bore to fit the bushing.
-chris
upper control arm links, I think that's what they are called. idk for sure with out looking at my repair manual.
even better and cheaper would be... go to the pick your part and yank some off of just about any civic or integra. I could be wrong but most all 90's Hondas with double wishbone suspension used them up front. there is a strip of metal that connects them, which could be a different length for larger and smaller vehicles. other than that I think they are the same bore to fit the bushing.
-chris
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2011
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Re: Upper control arm hardware
Alright thanks i'll look on amazon and see if I can find them. Thanks for your help. At least that's another Junk2 part removed from the car lol
Thread
Thread Starter
Forum
Replies
Last Post
JDMCRX
Honda Accord (1990 - 2002)
2
06-22-2011 05:37 PM