1st Pass of Test & Tune @ Lebanon valley dragway
#78
Honda-Tech Member
Thread Starter
#79
Honda-Tech Member
Thread Starter
Re: 1st Pass of Test & Tune @ Lebanon valley dragway
Picked up a 06 Chevy Silverado 1500 and a 18 foot car trailer over the past week. I am now ready to run 10.50 class at both Honda days and Forced induction sport at the IFO events!
#81
Honda-Tech Member
Thread Starter
#82
Honda-Tech Member
#84
Honda-Tech Member
Re: 1st Pass of Test & Tune @ Lebanon valley dragway
Congrats!. Talk about inspiration. I Follow you on instagram and saw the first picture and knew who it was.
What gear are you doing burnouts in? Im trying to get my 60's down and have tried a bunch of stuff. 1.74 is the best the car has pulled, my car is 2630 with me In it and 3/4 tank. 23-8-13 M&H on a 13x9 wheel. Im only leaving out of the hole at 5500 at like 4psi. Doesnt bog out of the hole or anything tires at 9psi.
What gear are you doing burnouts in? Im trying to get my 60's down and have tried a bunch of stuff. 1.74 is the best the car has pulled, my car is 2630 with me In it and 3/4 tank. 23-8-13 M&H on a 13x9 wheel. Im only leaving out of the hole at 5500 at like 4psi. Doesnt bog out of the hole or anything tires at 9psi.
#85
Honda-Tech Member
Thread Starter
Re: 1st Pass of Test & Tune @ Lebanon valley dragway
Congrats!. Talk about inspiration. I Follow you on instagram and saw the first picture and knew who it was.
What gear are you doing burnouts in? Im trying to get my 60's down and have tried a bunch of stuff. 1.74 is the best the car has pulled, my car is 2630 with me In it and 3/4 tank. 23-8-13 M&H on a 13x9 wheel. Im only leaving out of the hole at 5500 at like 4psi. Doesnt bog out of the hole or anything tires at 9psi.
What gear are you doing burnouts in? Im trying to get my 60's down and have tried a bunch of stuff. 1.74 is the best the car has pulled, my car is 2630 with me In it and 3/4 tank. 23-8-13 M&H on a 13x9 wheel. Im only leaving out of the hole at 5500 at like 4psi. Doesnt bog out of the hole or anything tires at 9psi.
#86
Honda-Tech Member
#87
Honda-Tech Member
Thread Starter
Re: 1st Pass of Test & Tune @ Lebanon valley dragway
Went to New England Dragway yesterday for the import faceoff event (10/12/14) and came home with a new best time of 10.3 at 138. My plugs were on there way out but didn't have a spare set with me to change them all day. Started to misfire lightly in 4th gear.
#90
Honda-Tech Member
Re: 1st Pass of Test & Tune @ Lebanon valley dragway
Nice stuff! Bump for good progress!
Putting together my new setup for my DA right now! can't wait.
What bore, cams and compression?
Putting together my new setup for my DA right now! can't wait.
What bore, cams and compression?
#91
Honda-Tech Member
Thread Starter
#96
Honda-Tech Member
Thread Starter
Re: 1st Pass of Test & Tune @ Lebanon valley dragway
A little update for 2015
Full Blown dual hanger with dual AEM 320 fuel pumps. I will also be ordering -8 feed lines and -6 return
Full Blown dual hanger with dual AEM 320 fuel pumps. I will also be ordering -8 feed lines and -6 return
Thread
Thread Starter
Forum
Replies
Last Post