Fastest Bolt-on/Tune/Stock Internal DC5 On A DOT Drag Radial
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Location: Wash D.C.
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Fastest Bolt-on/Tune/Stock Internal DC5 On A DOT Drag Radial
Just wanted to share my simple setup with some of the other guys that have heavier N/A cars. Got back from Friday Night T&T yesterday and finally broke 12s on a DOT tire in my Dc5. The Motor is a bone stock internals K20Z1. Chassis is an 05 RSX-S. Setup is I/H/PRC Mani/Tuned on E90/Skunk2 drag suspension in rear/MT 205/50/15 inch Drag Radials set to 19 Psi. Stock Trans with open diff. Launched the car just above 4k.
Break Down:
60'...2.009
330...5.603
1/8...8.470
MPH...85.57
1000...10.803
1/4...12.923
MPH...107.74
Also the DA for the day was around +1000 ft at the time of the run, so i think the car definitely has more in it as the weather gets cooler! Big ups to my tuner Herbert B. for all the help!!
Break Down:
60'...2.009
330...5.603
1/8...8.470
MPH...85.57
1000...10.803
1/4...12.923
MPH...107.74
Also the DA for the day was around +1000 ft at the time of the run, so i think the car definitely has more in it as the weather gets cooler! Big ups to my tuner Herbert B. for all the help!!
#2
Re: Fastest Bolt-on/Tune/Stock Internal DC5 On A DOT Drag Radial
Nice! Ran the same as my maxima with similar mods just about!
Some 15" wheels with a slick will work wonders for you.
Some 15" wheels with a slick will work wonders for you.
#6
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Location: Wash D.C.
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fastest Bolt-on/Tune/Stock Internal DC5 On A DOT Drag Radial
#7
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Location: Wash D.C.
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Location: Wash D.C.
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post