Post Your Interior!!! THREAD
#2981
Re: Show Your Dash!!
Here is my 91 Accord custom gauge panel.
I took the miles back to zero (not as easy as it sounds) and made custom alterations.
One of the lights that are on has been changed to say Air Ride when the compressor is on.
The other light says LPG for propane in use. This car can run on dual fuels.
The really tought part was squeeezing two segmented LED displays into the dash where other stuff used to be. These indicate the front hight and rear hight for the Air Ride system. I liked the white and chrome bezel set up and it also has a color change feature for the gauges that has a dash mounted **** to change it. The cool blue backgroung light is my favorite and easiest on the eye.
I took the miles back to zero (not as easy as it sounds) and made custom alterations.
One of the lights that are on has been changed to say Air Ride when the compressor is on.
The other light says LPG for propane in use. This car can run on dual fuels.
The really tought part was squeeezing two segmented LED displays into the dash where other stuff used to be. These indicate the front hight and rear hight for the Air Ride system. I liked the white and chrome bezel set up and it also has a color change feature for the gauges that has a dash mounted **** to change it. The cool blue backgroung light is my favorite and easiest on the eye.
#2988
Honda-Tech Member
#2992
Ferio Wdm Edition
#2993
Socialist Ricer
Join Date: Apr 2004
Location: England
Posts: 1,533
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post Your Interior!!! THREAD
Implying my seat is cheap?! You son of a bitch
http://www.corbeau.com/products/fia-seats/sprint/
Thanks, its a UK spec S14.
http://www.corbeau.com/products/fia-seats/sprint/
Thanks, its a UK spec S14.
#2994
longest project ever
Join Date: Sep 2009
Location: on the south side of dixie, 1986 Accord Hatch
Posts: 3,494
Likes: 0
Received 2 Likes
on
2 Posts
Re: Post Your Interior!!! THREAD
not all put in yet, but a few pieces.
part of the center console, gauge holder is eventually for a wide band, the support is the first titanium plate they took out of my wifes leg.
overhead console is out of a wind star, heavily modified to remove all the mom stuff.
visors are made from a mutilated speed limit sign, everything is fabricated on them except for the end pieces that attach to the roof.
mirror is a Gentex auto dimming from a Lincoln, 5 bucks at the yard, they are really nice mirrors
I made the E brake handle and replaced the plastic button with a billet one, also made the boot, ignore the green buttons they were for testing, they have been replaced with black ones
pedals which I have yet to put in, made the pedal pads
dash ready to go in, I can control the basic head unit functions from the center console.
Attachment 523499
it has original JDM folding mirrors for an 86, the fog light switch is made from a modified headlight retractor switch, and I cut down a three switch bezel to make a single bezel to fit in there, I machined the gauge rings from tailwheel hubs.
gauges came from one of my old race cars, they are vintage sun pro and match the factory gauges.
Attachment 523284
Attachment 523500
Attachment 523501
thats a now vintage norskog low pressure fuel pressure gauge, plus the primer switch and choke pull
Attachment 523502
Attachment 523503
part of the center console, gauge holder is eventually for a wide band, the support is the first titanium plate they took out of my wifes leg.
overhead console is out of a wind star, heavily modified to remove all the mom stuff.
visors are made from a mutilated speed limit sign, everything is fabricated on them except for the end pieces that attach to the roof.
mirror is a Gentex auto dimming from a Lincoln, 5 bucks at the yard, they are really nice mirrors
I made the E brake handle and replaced the plastic button with a billet one, also made the boot, ignore the green buttons they were for testing, they have been replaced with black ones
pedals which I have yet to put in, made the pedal pads
dash ready to go in, I can control the basic head unit functions from the center console.
Attachment 523499
it has original JDM folding mirrors for an 86, the fog light switch is made from a modified headlight retractor switch, and I cut down a three switch bezel to make a single bezel to fit in there, I machined the gauge rings from tailwheel hubs.
gauges came from one of my old race cars, they are vintage sun pro and match the factory gauges.
Attachment 523284
Attachment 523500
Attachment 523501
thats a now vintage norskog low pressure fuel pressure gauge, plus the primer switch and choke pull
Attachment 523502
Attachment 523503
Last edited by lostforawhile; 08-25-2014 at 03:14 PM.
#2998
Honda-Tech Member
Join Date: Dec 2006
Location: San Diego | Marikina
Posts: 4,910
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post Your Interior!!! THREAD
My hatch interior...
[IMG]http://i1148.photobucket.com/albums/o571/sethbladow/EJ6/IMG_3968_zps989700df.jpg[IMG]
Tweed armrests
[IMG]http://i1148.photobucket.com/albums/o571/sethbladow/EJ6/c042e191-f239-48ff-a164-cefadeb4e6bc_zps85f24894.jpg[IMG]
More tweed
[IMG]http://i1148.photobucket.com/albums/o571/sethbladow/EJ6/0f7c9bb3-bedd-4597-b6d9-4edd5068b023_zpsf2983905.jpg[IMG]
Checkered Sports shift ****
[IMG]http://i1148.photobucket.com/albums/o571/sethbladow/EJ6/77c3c12d-0df7-4497-b382-8a3c19c10409_zps59b38124.jpg[IMG]
[IMG]http://i1148.photobucket.com/albums/o571/sethbladow/EJ6/IMG_3968_zps989700df.jpg[IMG]
Tweed armrests
[IMG]http://i1148.photobucket.com/albums/o571/sethbladow/EJ6/c042e191-f239-48ff-a164-cefadeb4e6bc_zps85f24894.jpg[IMG]
More tweed
[IMG]http://i1148.photobucket.com/albums/o571/sethbladow/EJ6/0f7c9bb3-bedd-4597-b6d9-4edd5068b023_zpsf2983905.jpg[IMG]
Checkered Sports shift ****
[IMG]http://i1148.photobucket.com/albums/o571/sethbladow/EJ6/77c3c12d-0df7-4497-b382-8a3c19c10409_zps59b38124.jpg[IMG]