► 1994-2001 (GEN 3) - All General information & specifications
#80
Re: ► 1994-2001 (GEN 3) - All General information & specifications
I have a guy wanting to sell me an integra 1992 with a b18 has four flat tires spun bearing but there could be more there to that story been sitting for a lil while need to know if its worth 1200 dollers that's what he wants for it info or feed back please....
#81
Re: ► 1994-2001 (GEN 3) - All General information & specifications
Hey so new integra owner. And user so thats why Im just latching onto this thread hopefully looking for answers.
Literally bought the thing two days ago. When I test drove it everything went fine. Accelerated hard, everything was smooth, engine ran great. Now, when I accelerate hard, when the vtec hits (5k) the tach starts jumping around wildly and the acceleration becomes uneven and some times it feels like it miss fires completely. (car shakes and lurches forward and then runs normally). Now on here Ive seen plenty of things that point to the distributor or ignition coil, but the distributor on there looks pretty new....Could the guy I bought it off of installed the distributor and fucked it up and now the ignition coil is bad? Spark plugs?
Literally bought the thing two days ago. When I test drove it everything went fine. Accelerated hard, everything was smooth, engine ran great. Now, when I accelerate hard, when the vtec hits (5k) the tach starts jumping around wildly and the acceleration becomes uneven and some times it feels like it miss fires completely. (car shakes and lurches forward and then runs normally). Now on here Ive seen plenty of things that point to the distributor or ignition coil, but the distributor on there looks pretty new....Could the guy I bought it off of installed the distributor and fucked it up and now the ignition coil is bad? Spark plugs?
#84
Re: ► 1994-2001 (GEN 3) - All General information & specifications
Does anyone know if i can upgrade the stock speakers in a 98 integra ls with the stock deck? Without any other mods. Will it sound better or do I need an amp?
#85
Re: ► 1994-2001 (GEN 3) - All General information & specifications
Hey i have a 98 Integra ls bone stock. I was wondering if anyone knew if i can just slap in a new set of speakers in with the stock stereo or do I need an amplifier?
#86
Re: ► 1994-2001 (GEN 3) - All General information & specifications
Total production numbers for integras from 94-2002 ( yes, 2002, thats NOT a typo)
wiki is wrong.. actual number is 314,497 integras were made and sold
94-67,426
95-61,316
96-46,966
97-38,331
98-34,904
99-26,184
00-25,975
01-13,376
02-19
No lie, only 19 model year integras had been made and sold, and more then likely, sold as 2001 factory left overs even though they ARE INFACT 2002 production models. That would make those vin codes the rarest of the rare for 2002. What sucks, honda got rid of the break downs for trim levels. So there is no way to determine how many of each model was actually sold. Although the higher production run for 94' GSR sedans are among the rarest that year as they had to be brought in from japan. I have a production# 002214 jh4 DB8 gsr.
http://www.hondainamerica.com/sites/...ctBook2012.pdf PAGE #17
wiki is wrong.. actual number is 314,497 integras were made and sold
94-67,426
95-61,316
96-46,966
97-38,331
98-34,904
99-26,184
00-25,975
01-13,376
02-19
No lie, only 19 model year integras had been made and sold, and more then likely, sold as 2001 factory left overs even though they ARE INFACT 2002 production models. That would make those vin codes the rarest of the rare for 2002. What sucks, honda got rid of the break downs for trim levels. So there is no way to determine how many of each model was actually sold. Although the higher production run for 94' GSR sedans are among the rarest that year as they had to be brought in from japan. I have a production# 002214 jh4 DB8 gsr.
http://www.hondainamerica.com/sites/...ctBook2012.pdf PAGE #17
#96
Re: ► 1994-2001 (GEN 3) - All General information & specifications
I have a 1994 GSI Manual Honda Integra - It's having an tachometer and speedometer freaking out issues. it's getting hot. fan not kicking in. its like fuel issues cutting in and out as the revs hit the red line (yet its not even up at the redline when you hear it reving outside car) its stalling when i go to take off at times as its going on its own little freak out what do i need to do if it's intermittant also? please help... it's driving me nuts. Thanks !!! - New Zealander.
#98
Re: ► 1994-2001 (GEN 3) - All General information & specifications
Do u have a thread for motor swap i have to replace my b18b1 and just putting another one in but when i got my car it was half done and this will be my first motor swap
#99
Honda-Tech Member
Re: ► 1994-2001 (GEN 3) - All General information & specifications
I'm having a really hard time finding the torque spec for the header to head mounting nuts. mitchell1, and Chilton couldn't find ****, and my alldata access got fucked up. Would you happen to have the torque specs for those nuts? And i'd imagine it was an inward work your way out style torque procedure, is this so? thank you for your post, the specs have helped me tremendously already!
#100
Re: ► 1994-2001 (GEN 3) - All General information & specifications
This info is GOLD. Going to be really helpful for me. I just picked up my first Honda\Acura unit ever. 97' Integra RS, manual.
Quite happy with the ride so far. I can't wait to learn a whole bunch more !
Quite happy with the ride so far. I can't wait to learn a whole bunch more !