You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!
I've got a problem wich i can not figure out to save my life... :S
So the problem.
I've got Honda accord CC7 2.3i SR wich has f20a4(i bought it that way) from a 4th gen prelude it it.
as far as i can tell everything on the engine is swapped except ECU(p44-g20) and all its wire harness. From ecu to engine.
And the problem i am having is that it wont start properly when the engine is cold but will start from half a turn when it has been runing for atleast a minute(yea exactly, 1 minute atleast).
And the weird thing is that if i crank continuously it wont start, but if i crank for 1 sec, then stop, then on second try it sometimes starts but sputters at start a bit at ~500rpm +/- 100 and then revs up but sometimes it stalls after sputtering then 3rd try it starts.
AND when it just has started if i press throttle sharply it seems like it's about to stall an then revs up...
and i repeat... All this happens only at 1st 1-2 mins when engine is stone cold...
Here some videos i took
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.