wooddsam

Hey... The previous owner had a Python 700 system installed and it looks like the red/blue from the steering wheel horn buttons hooks into the brain in the fuse box.
As of now, the stock horn is unplugged under the bumper, because when it is plugged in it will not stop sounding.
I've checked for shorts in the steering wheel and it was fine. I even cut both wires to see if there was a sticky button, but when BOTH of them were cut, it was still sounding.
So I think it might be a relay problem but I have NO idea where that relay is or how to get to it.

Any suggestions? I know I just threw a lot of info at you. haha. This is the ONLY thing kicking my *** at E/I.

redbull-1

I don't see a horn relay in the horn circuit. There is the red/blue wire and a white/yellow wire.

wooddsam

In the Hayne's it has a relay diagrammed into it. I can hear it clicking when I press the buttons, too.

redbull-1

Let me go check another one of my sources.

redbull-1

Okay, KG models had the horn relay. Here's the location:

wooddsam

thanks man, I'll look into that. I hate taking electrical problems into mechanics