C16 vs. Q16 vs. VP Import?
#26
Honda-Tech Member
Join Date: Mar 2002
Location: Crofton, Md, USA
Posts: 2,459
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
Agree.... I think q16 burns a lot hotter in the pipe...... but the plugs dont show much heat.... You better not be scared in october 50 degree evening qualifiers, if you dont run better than you have been, gonna be disapointed.....
#27
Honda-Tech Member
Join Date: Dec 2001
Location: long island, ny, united states
Posts: 12,822
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
#28
Honda-Tech Member
Thread Starter
Join Date: Jan 2005
Location: Mississauga, ON, Canada
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
So it is corrosive? What's the maintanance like? I noticed that it burns a lot more fuel as well. Wanted to know because I haven't used C16 and was on Torco's 118 last year. I did notice a difference in power this year with the Q16.
#29
Re: C16 vs. Q16 vs. VP Import?
Buddy of mine runs q16 in his evo... loves it and made more power on it than c16 on kill. The only downside he saw was you have to run it through pretty quick and not let it sit a whole lot like everyone else is saying here. Price was same as if he ran C16 basically so why not make more with the oxygenated fuel.
#30
Honda-Tech Member
iTrader: (5)
Join Date: Dec 2005
Location: RENO, NV
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
I been sticking with my 7$ a gallon 112 Sunoco.
Buddy of mine runs q16 in his evo... loves it and made more power on it than c16 on kill. The only downside he saw was you have to run it through pretty quick and not let it sit a whole lot like everyone else is saying here. Price was same as if he ran C16 basically so why not make more with the oxygenated fuel.
Buddy of mine runs q16 in his evo... loves it and made more power on it than c16 on kill. The only downside he saw was you have to run it through pretty quick and not let it sit a whole lot like everyone else is saying here. Price was same as if he ran C16 basically so why not make more with the oxygenated fuel.
#32
Honda-Tech Member
Join Date: Oct 2005
Location: logan, ohio, us
Posts: 1,328
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
so with id1000's or id2000's should we stick to c16 or is there a better fuel to use then c that we can use with those injectors without worrying about the corrosion that the q has
#33
Honda-Tech Member
Join Date: Nov 2002
Location: Houston, TX, USA
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
We run Q in the RSX, AFRs are 12.8s.. I'd go leaner and see if it picks up power but we still have 25 more PSI to go and were already breakin the 26inchers loose in 3rd @ 30PSI.
#34
Honda-Tech Member
iTrader: (11)
Re: C16 vs. Q16 vs. VP Import?
Q16 and VP Import causes the valve to swell, restricting flow. They car compatible with every other fuel we've tested to date. If they are run on either of those fuels, they come back to normal after airing out for about 48 hours.
We recommend C16 or C23 for really high hp applications.
We recommend C16 or C23 for really high hp applications.
#35
Honda-Tech Member
Re: C16 vs. Q16 vs. VP Import?
Originally Posted by tony1
Q16 and VP Import causes the valve to swell, restricting flow. They car compatible with every other fuel we've tested to date. If they are run on either of those fuels, they come back to normal after airing out for about 48 hours.
We recommend C16 or C23 for really high hp applications.
Q16 and VP Import causes the valve to swell, restricting flow. They car compatible with every other fuel we've tested to date. If they are run on either of those fuels, they come back to normal after airing out for about 48 hours.
We recommend C16 or C23 for really high hp applications.
That ONLY applies to the ID2000's
NOT the ID1000's
I run 8x ID1000cc's in my car on Q16 and have not had a single problem. The car hasn't seen full power yet, but it will soon.... that shouldn't matter though.
I don't know if the Bosch pumps like it though.... I guess only time will tell.
#41
Honda-Tech Member
Join Date: Dec 2001
Location: long island, ny, united states
Posts: 12,822
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
If you are going from q16 the only way to go is up and that is to import. That is if you are willing to spend the $25 a gallon for the import fuel.
In going from the q16 down to c23 you will gain some octane rating but you are losing the important part and that is the fuel being oxygenated. That helps in keeping detonation down. The fuel being oxygenated helps in the atomization/vaporization of the fuel.
In going from the q16 down to c23 you will gain some octane rating but you are losing the important part and that is the fuel being oxygenated. That helps in keeping detonation down. The fuel being oxygenated helps in the atomization/vaporization of the fuel.
#42
Honda-Tech Member
Join Date: Jul 2003
Location: NEW YORK, us
Posts: 2,830
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
If you are going from q16 the only way to go is up and that is to import. That is if you are willing to spend the $25 a gallon for the import fuel.
In going from the q16 down to c23 you will gain some octane rating but you are losing the important part and that is the fuel being oxygenated. That helps in keeping detonation down. The fuel being oxygenated helps in the atomization/vaporization of the fuel.
In going from the q16 down to c23 you will gain some octane rating but you are losing the important part and that is the fuel being oxygenated. That helps in keeping detonation down. The fuel being oxygenated helps in the atomization/vaporization of the fuel.
#43
Honda-Tech Member
Join Date: Dec 2001
Location: long island, ny, united states
Posts: 12,822
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
I see what you are saying but SG (specific gravity) has a major play in alot of how well a fuel does also. I would probably most likely go with the c16 over the c23 seeing as how both are non-oxygenated fuels but the SG of the c16 is .73x and the c23 is .70x. That is a huge difference in itself. That is most likely the major reason as to why c16 was such a succesful blend before the q16 came along.
#44
Re: C16 vs. Q16 vs. VP Import?
Where is everybody getting there Q16? I live in NY so they dont sell it here. I call like three places in NJ, and they all said they were sold out and it would take 3 months to get. This was in the summer, thats why I still run c16.
#45
Honda-Tech Member
Join Date: Jul 2003
Location: NEW YORK, us
Posts: 2,830
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
they lifted the rule about 3 weeks ago for the sale of MTBE fuel in NY, i know SK speed has it in stock, and im sure any other VP dealer should be able to get it aswell
#46
Honda-Tech Member
Join Date: Dec 2001
Location: long island, ny, united states
Posts: 12,822
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
Darren(gt30ek), I have it in stock but not in 5 gallon pails. I jsut recieved 2 55 gallon drums late last week.
#47
Honda-Tech Member
Re: C16 vs. Q16 vs. VP Import?
I see what you are saying but SG (specific gravity) has a major play in alot of how well a fuel does also. I would probably most likely go with the c16 over the c23 seeing as how both are non-oxygenated fuels but the SG of the c16 is .73x and the c23 is .70x. That is a huge difference in itself. That is most likely the major reason as to why c16 was such a succesful blend before the q16 came along.
#48
Honda-Tech Member
Join Date: Dec 2001
Location: long island, ny, united states
Posts: 12,822
Likes: 0
Received 0 Likes
on
0 Posts
Re: C16 vs. Q16 vs. VP Import?
Are you ****ing with me or do you want to see if I know the answer? Either way. Here is my answer to your question.
Fuels that have a higher specific gravity number have a higher resistance to detonation.
Import has a sg of .744 and is oxygenated, q16 has a sg of .716 an is oxygenated. C16 is not oxygenated and has an sg of .735. Now c23 is not oxygenated and has an sg of .713. C23 is the lightest of the group in question and is also not oxygenated. I am in no way saying that c23 is a bad fuel but why would you choose c23 over c16? Based solely on the octane rating?
The reason for this is that the fuel will i guess you could say "fall" faster, the faster the fuel falls the quicker the fuel gets away from largest concentration of heat which is the the top of the cylinder or other wise known as the combustion chamber.
In turn cold is denser than hot air so it falls where hot air rises.
Fuels that have a higher specific gravity number have a higher resistance to detonation.
Import has a sg of .744 and is oxygenated, q16 has a sg of .716 an is oxygenated. C16 is not oxygenated and has an sg of .735. Now c23 is not oxygenated and has an sg of .713. C23 is the lightest of the group in question and is also not oxygenated. I am in no way saying that c23 is a bad fuel but why would you choose c23 over c16? Based solely on the octane rating?
The reason for this is that the fuel will i guess you could say "fall" faster, the faster the fuel falls the quicker the fuel gets away from largest concentration of heat which is the the top of the cylinder or other wise known as the combustion chamber.
In turn cold is denser than hot air so it falls where hot air rises.
#49
Honda-Tech Member
Re: C16 vs. Q16 vs. VP Import?
I'm not f*cking with you. I have never seen a correlation between SG and resistance to detonation. I thought octane rating was a fuels resistance to detonation?
What about C10? It's SG is .763 and octane rating is only 104.
There's more to choosing a fuel than octane, but i've never heard SG being one of them unless you're trying to maximize fuel flow through a given injector/carb jet.
What about C10? It's SG is .763 and octane rating is only 104.
There's more to choosing a fuel than octane, but i've never heard SG being one of them unless you're trying to maximize fuel flow through a given injector/carb jet.