jasoncanseeoh

I got this pic from jdmshit.com and I was wondering what kind of front end that is on the black/white EK

What kind of bumper, lip, lights, etc.?
What year OEM bumper is that too?

Help is appreciated. THANKS GUYS.

EK_Stunna

it's a 99-00 Civic front end with an SI lip, SI grill, and fog lights.

k20eg6bk!

ctr headlights.

boostedhatchie

99-00 front bumper, looks like the license plate holes are shaved. oem si lip ( looks like an oem si grill too) ctr headlights and clear fogs, not sure if they are oem or not, but i would assume they are.

jasoncanseeoh

And with that said, if I were to have a '98 hatch, can I just switch the bumpers out without doing anything else?
THAT EASY?

EK_Stunna

no, you would basically have to get the whole front end. as in headlights, grill, bumper, fenders, and hood.

and i think you have to change the radiator support, i'm not sure though. i read it along time ago and forgot what someone did to make it fit.

jasoncanseeoh

Does anyone know EXACTLY what must be done?
And how much will it be?

ZaCh AttaCk

all you need is the front end parts as stated above.

hood/fenders/headlights/bumper

retroFIT

You can change out your rad support if you don't want to cut your bumper, but then you're going to have to spot weld the new rad support back on.

The easier way is just to modify and cut your bumper. It'll save you time and trouble.

How much all of this is going to cost will depend on where you get your parts, what parts you get (oem, jdm or aftermarket), and labor.


Don't forget about the front grill.

faster Type R

96-98 front end>99-00 front end....maybe im just bias ;p

lponcian5799

x2

HellerDopeEK4

x3

ek20tinter

There is no need to change the rad support or cut the bumper, All it has to be done is trim the tabs that hold the corner that meets the grill and bumper ( I will post pics if needed) and use nice screws,I have done it plenty times. But you will need the headlights, hood, fenders, bumper and grill and of course the foglights and dont forget the lip!!! lol

ClutchVtech9

please post pics. my front end conversion has fitment issues.

jasoncanseeoh

POST PICS HERE!

boostedhatchie

Please say no to 99-00 front end conversions. Your car likes being a 96-98.

Eran

iTrader: (1)

99-00 conversions are the AIDS of the Honda world.

mario_pic

dont need to swap rad suport simple drop in simple cut

lol slit the bumper and call it a day so after words if u dont like it u can go back and ull see what i mean by slit it when ur doing it lol i did mine looks nice did a fullllllllll 2000 conversion down to the dash and wires lol 98 shell with fulll 99 stuff ps all the dush ***s with 99-2000 that sell them want the world for them lol thats y there is conversions so if 99-00 conversions are the aids of honda then the jdm integra conversions are the aids of the honda world as well right no matter not ballen thay look if we all thought like u lol

ps iv done both swaps 96 to 99 civic and usdm integra to jdm integra with out swaping the rad suport tbar swap

ek20tinter

^^^^ what he siad lol... anyways im trying to find time to take my wifes car appart ( a daily beater)to show what Im talking about...

ek20tinter

Came across these and I thought it would be easier to post them than to explain my wife why im taking her car appart lol, Im not a computer type person other then graphics so I hope these help you guys!!! there is a whole detailed write up on jdm universe about it