FSW friction stir welding. AMAZING!
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: MA
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
FSW friction stir welding. AMAZING!
#3
Honda-Tech Member
Join Date: Mar 2008
Location: honolulu, hi, usa
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Re: FSW friction stir welding. AMAZING!
if you ever get under an 05+(?) sti you will see some friction stir welded suspension arms, where the sway bar link braket is welded on using this method. its very clean looking
#6
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: MA
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
Re: FSW friction stir welding. AMAZING!
from the looks of it, its heating it up with friction and stirring the 2 halfs into eachother, i question if its truely liquified or only heated to a maluable mush and sort of buffed flat by the large puck above it. either way its super cool.
#7
Honda-Tech Member
Join Date: Jun 2004
Location: Sherman Oaks, CA, United States
Posts: 7,539
Likes: 0
Received 4 Likes
on
4 Posts
Re: FSW friction stir welding. AMAZING!
http://en.wikipedia.org/wiki/Friction_stir_welding
This heat, along with the heat generated by the mechanical mixing process and the adiabatic heat within the material, cause the stirred materials to soften without reaching the melting point (hence cited a solid-state process), allowing the traversing of the tool along the weld line in a plasticised tubular shaft of metal.
Thread
Thread Starter
Forum
Replies
Last Post
josephcmiller2
Suspension & Brakes
6
04-27-2011 04:53 PM
b18crx
Honda CRX / EF Civic (1988 - 1991)
2
01-02-2004 08:28 AM
DMCsteve
Honda Civic / Del Sol (1992 - 2000)
9
07-23-2002 07:22 AM