Differences between D16Z6 and D16Y8?
#3
Junior Member
Join Date: Jan 2001
Location: Fairfax, VA, USA
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
Re: Differences between D16Z6 and D16Y8? (Spade)
hey spade, anyway we could drill down even more.. like:
OBDI and OBDII - requires 2nd O2 sensor, etc...
Headgasket. different material? thicker?
Intake manifold. y8 has a larger design, etc...
Chamber design.
Cam.
Headgasket. different material? thicker?
Intake manifold. y8 has a larger design, etc...
Chamber design.
Cam.
#4
Honda-Tech Member
Re: Differences between D16Z6 and D16Y8? (brcivic411)
Yup.
Y8 has thinnest D series head gasket.
OBDII..different distributor Second O2 sensor, Knock sensor, all the pain in the *** crap you don't want to deal with when attempting to tune an engine.
Y8 larger runners that are slightly shorter.
Chamber: smaller and more angular for better burn.
Cam: Slightly longer duration. 1-2 degrees.
Y8 has thinnest D series head gasket.
OBDII..different distributor Second O2 sensor, Knock sensor, all the pain in the *** crap you don't want to deal with when attempting to tune an engine.
Y8 larger runners that are slightly shorter.
Chamber: smaller and more angular for better burn.
Cam: Slightly longer duration. 1-2 degrees.
#5
Join Date: Aug 2002
Location: Southside ATL, GA, UNITED STATES OF AMERICA
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Re: Differences between D16Z6 and D16Y8? (Spade)
The Z6 has the better bottom end while the Y8 has the better up top. Honda made that Z6 block stronger and the Z6 has the wonderful and tunable P28 ECU. The Y8 has the better tranny. The gears are closer on the Y8. That's all that I can think of right now. I'm sure there's a lot more, and I'm sure the gurus of H-T know them.
#7
Honda-Tech Member
Re: Differences between D16Z6 and D16Y8? (haloseven)
so is there an advantage to swapping in a y8 tranny over my stock Z6?...thanks...
Trending Topics
#8
Join Date: Aug 2002
Location: Southside ATL, GA, UNITED STATES OF AMERICA
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Re: Differences between D16Z6 and D16Y8? (Spade)
I agree. The tranny is better, but not that much better. I don't have the tranny because I swapped trannies. I have it because it came with the engine and car. The SRR would probably be a better choice.
#10
Join Date: Jan 2002
Location: The Land of Corn and Railroads
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Re: Differences between D16Z6 and D16Y8? (X2BOARD)
How exactly did they make the Z6 block stronger ?
As far as up top, I think the z6 doesn't fare so well in terms of quench zones and it handles combustion gases less efficently than the Y8.
#14
Join Date: Aug 2002
Location: Southside ATL, GA, UNITED STATES OF AMERICA
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Re: Differences between D16Z6 and D16Y8? (Spade)
Of course you could, but that would be modifying it. The question was what is the difference between the z6 and y8. It sounds like stock z6 vs stock y8. We all could come up with ways that the two could be improved but that isn't the discussion.
[Modified by SILINITY16, 4:37 PM 11/19/2002]
[Modified by SILINITY16, 4:37 PM 11/19/2002]
#16
Re: Differences between D16Z6 and D16Y8? (Spade)
Spade, the Y8 trans is the beter trans, and if you are going to auto-x I would reccomend the Y8 trans over the Z6 Trans anyday, teh Z6 Trans has Aluminum shifter forks, and the Y8 is steel, the Z6 has the tendoncy to bend when used hard, even break....
Jesse
Jesse
#18
Honda-Tech Member
Join Date: May 2002
Location: Why so you can pretend like youre interested, FL/OK
Posts: 4,306
Likes: 0
Received 0 Likes
on
0 Posts
Re: Differences between D16Z6 and D16Y8? (SILINITY16)
The Z6 has the better bottom end while the Y8 has the better up top. Honda made that Z6 block stronger and the Z6 has the wonderful and tunable P28 ECU. The Y8 has the better tranny. The gears are closer on the Y8. That's all that I can think of right now. I'm sure there's a lot more, and I'm sure the gurus of H-T know them.
The SRR final drive kit, more preferred over the Vti LSD equipped transmission or just a greater addition on to the Vti transmission?
#20
Honda-Tech Member
Join Date: May 2001
Location: Trinidad, W.I.
Posts: 5,089
Likes: 0
Received 0 Likes
on
0 Posts
Re: Differences between D16Z6 and D16Y8? (HMBCivic)
All i could see is both engines are terrible in producing large amounts of horsepower . I know this because i have the d16z6.
#21
Honda-Tech Member
Re: Differences between D16Z6 and D16Y8? (X2BOARD)
As I'm sure Mr. Bone will state, the S40 (I think thats the 5G EX) and K4F trannies use the same ratio's, but the 6G trannys are physically stronger internally.
#23
Honda-Tech Member
Re: Differences between D16Z6 and D16Y8? (VTC_boost-less_CiViC)
Y8 has thinnest D series head gasket.
Thinnest Honda OEM headgasket
Thinnest Honda OEM headgasket
#24
Junior Member
Join Date: Nov 2001
Location: Ottawa, Ontario, Canada
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
Re: Differences between D16Z6 and D16Y8? (Spade)
can I put a z6 head on a y7 block (OBD-2) if I use a y8 distributor? or is there somethign else that wont match up cause of ODB1/2
I know I should make my own post, I did and I have and no answer...maybe y'all can help me
|eb_CRX
I know I should make my own post, I did and I have and no answer...maybe y'all can help me
|eb_CRX