NEED MAJOR HELP WITH ZC TIMING BELT!!!
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: St.pete FL
Posts: 2,975
Likes: 0
Received 0 Likes
on
0 Posts
NEED MAJOR HELP WITH ZC TIMING BELT!!!
I am dooing a swap as we speak, but cant seem to find the right t-belt for the DOHC ZC i have been through 4 no and no luck. Does anyone know ?
#3
Honda-Tech Member
Join Date: Feb 2005
Location: VA, USA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED MAJOR HELP WITH ZC TIMING BELT!!! (Bunger)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bunger »</TD></TR><TR><TD CLASS="quote">1988 Prelude 2.0 Si ???</TD></TR></TABLE>
Bingo thats the one you want.
Bingo thats the one you want.
#7
Member
Re: (CBURKE)
There shouldn't be any slop. If there is it will not stay timed properly. Did you tension the belt according to the service manual?
Steps to tension belt:
1. Set crank pulley so #1 piston is at TDC
2. Loosen timing belt tensioner
3. Turn crank pulley so the cam gears move 3 teeth in the counterclockwise direction
4. Tighten the tensioner
Modified by 91civic at 8:01 PM 7/6/2005
Steps to tension belt:
1. Set crank pulley so #1 piston is at TDC
2. Loosen timing belt tensioner
3. Turn crank pulley so the cam gears move 3 teeth in the counterclockwise direction
4. Tighten the tensioner
Modified by 91civic at 8:01 PM 7/6/2005
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: St.pete FL
Posts: 2,975
Likes: 0
Received 0 Likes
on
0 Posts
I have been reading alot about the zc and from what i have been reading it is like that beacuse we have to use the lude timing belt and not a zc. The belt even seems to be bigger.
#12
Member
Join Date: Feb 2002
Location: I sell JDM engines too, CA, US
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
Re: NEED MAJOR HELP WITH ZC TIMING BELT!!! (CBURKE)
depends on what ZC
the 1st gen is basically the D16A1 unit with the smaller cam gears
the 2nd gen ZC (88-91) is the prelude unit with bigger cam gears
check the belt route
did you miss any pulleys?
the 1st gen is basically the D16A1 unit with the smaller cam gears
the 2nd gen ZC (88-91) is the prelude unit with bigger cam gears
check the belt route
did you miss any pulleys?
#14
Honda-Tech Member
Join Date: Sep 2002
Location: colorado springs, co, usa
Posts: 5,643
Likes: 0
Received 28 Likes
on
28 Posts
Re: NEED MAJOR HELP WITH ZC TIMING BELT!!! (HumanResource)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HumanResource »</TD></TR><TR><TD CLASS="quote">
the 2nd gen ZC (88-91) is the prelude unit with bigger cam gears
</TD></TR></TABLE>
not true - the 2nd gen ZC is not a Prelude unit - it is a unique engine - all DOHC ZCs have same diameter cam gears as B-series or H-series - 34 teeth (timing marks are different, but they are the same size) - the 88 Prelude 2.0 Si timing belt and the DOHC ZC timing belt are identical and have the same part number 14400-PK2-004 - the belt has 124 teeth with 9.5mm pitch
the 2nd gen ZC (88-91) is the prelude unit with bigger cam gears
</TD></TR></TABLE>
not true - the 2nd gen ZC is not a Prelude unit - it is a unique engine - all DOHC ZCs have same diameter cam gears as B-series or H-series - 34 teeth (timing marks are different, but they are the same size) - the 88 Prelude 2.0 Si timing belt and the DOHC ZC timing belt are identical and have the same part number 14400-PK2-004 - the belt has 124 teeth with 9.5mm pitch
#15
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: St.pete FL
Posts: 2,975
Likes: 0
Received 0 Likes
on
0 Posts
Ok i think i got it. I looked over the book and i think i see what's up. But, the belt is almost or well it tuches the motor mount. The belt tenchiner bolt is at the bottom so it can't get any tighter. The belt say's 184 on the top. Maybe it's the wrong belt. Lets go for belt #5!!!
#16
Honda-Tech Member
Re: (CBURKE)
sorry to bump an old thread buy won't a Tbelt from an 89 integra work on a DOHC ZC?
edit: and yes i have looked thru all the archived posts
edit: and yes i have looked thru all the archived posts
#17
Honda-Tech Member
Join Date: Sep 2002
Location: colorado springs, co, usa
Posts: 5,643
Likes: 0
Received 28 Likes
on
28 Posts
Re: (legendboy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by legendboy »</TD></TR><TR><TD CLASS="quote">sorry to bump an old thread buy won't a Tbelt from an 89 integra work on a DOHC ZC?
edit: and yes i have looked thru all the archived posts </TD></TR></TABLE>
no, the DOHC ZC timing gears are smaller than the Integra - DOHC ZC cam gears have 34 teeth and crank gear has 17 teeth - the Integra cam gears have 40 teeth and the crank gear has 20 teeth - Integra belt is too long
edit: and yes i have looked thru all the archived posts </TD></TR></TABLE>
no, the DOHC ZC timing gears are smaller than the Integra - DOHC ZC cam gears have 34 teeth and crank gear has 17 teeth - the Integra cam gears have 40 teeth and the crank gear has 20 teeth - Integra belt is too long
Thread
Thread Starter
Forum
Replies
Last Post
nexgen91
Honda CRX / EF Civic (1988 - 1991)
12
07-04-2007 06:13 AM
crxzcracer
Honda CRX / EF Civic (1988 - 1991)
6
03-29-2004 05:23 AM
DelSlowTurbo
Honda CRX / EF Civic (1988 - 1991)
10
02-22-2004 10:37 AM