my wastegate stays open at idle :(
#1
Thread Starter
Join Date: Jan 2003
Location: santa ana, ca, USA
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
my wastegate stays open at idle :(
sup guyz my wastegate stays open at idle and boost doesnt kick in till around 5k rpms. what is wrong? plz help thanks. its a tial style wastegate 38mm
do i need that o ring? can't find anywhere to get it at.
ok i think i do already have a valve seat. but i opened up the wastegate and found out one out of four lil allen screws are missing. can that be the problem? when i push the thingy up and down air leaks out of one of the missing holes. tell me what u guyz think.
u see those three lil screws? its missing one of those sorry for the bad quality pics took from camera phone
Modified by egturbo at 9:36 PM 7/15/2004
do i need that o ring? can't find anywhere to get it at.
ok i think i do already have a valve seat. but i opened up the wastegate and found out one out of four lil allen screws are missing. can that be the problem? when i push the thingy up and down air leaks out of one of the missing holes. tell me what u guyz think.
u see those three lil screws? its missing one of those sorry for the bad quality pics took from camera phone
Modified by egturbo at 9:36 PM 7/15/2004
#2
Re: my wastegate stays open at idle :( (egturbo)
Assuming the wastegate is not defective, the only way it could be bleeding or leaking exhaust at idle is if you have a vacuum signal going to the top port or neglected to put in the valve seat between the gate and manifold.
#4
Thread Starter
Join Date: Jan 2003
Location: santa ana, ca, USA
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: my wastegate stays open at idle :( (turbopimp)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbopimp »</TD></TR><TR><TD CLASS="quote">Assuming the wastegate is not defective, the only way it could be bleeding or leaking exhaust at idle is if you have a vacuum signal going to the top port or neglected to put in the valve seat between the gate and manifold.</TD></TR></TABLE>
yeah about it used and i see a gap betweeen the valve and the falnge. is there a place i can get that seal? 38mm tial style wastegate.
yeah about it used and i see a gap betweeen the valve and the falnge. is there a place i can get that seal? 38mm tial style wastegate.
#5
H-T White Ops
Join Date: Jun 2003
Location: Nor Cal
Posts: 4,875
Likes: 0
Received 0 Likes
on
0 Posts
go to a parts store and buy some gasket material. Make your own. Razor knife and some scissors.
Do you have that ring in there? If you do you'll know what I'm talking about. Turbopimp called it the valve seat.
Do you have that ring in there? If you do you'll know what I'm talking about. Turbopimp called it the valve seat.
#6
Re: my wastegate stays open at idle :( (egturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egturbo »</TD></TR><TR><TD CLASS="quote">
yeah about it used and i see a gap betweeen the valve and the falnge. is there a place i can get that seal? 38mm tial style wastegate.</TD></TR></TABLE>
I think those knock-off Tials are sold on Ebay by SSAutoChrome. You might want to contact them about purchasing the ring. If not, then the Tial piece might work, but I'd check with someone first to make sure 100% about compatability.
yeah about it used and i see a gap betweeen the valve and the falnge. is there a place i can get that seal? 38mm tial style wastegate.</TD></TR></TABLE>
I think those knock-off Tials are sold on Ebay by SSAutoChrome. You might want to contact them about purchasing the ring. If not, then the Tial piece might work, but I'd check with someone first to make sure 100% about compatability.
Trending Topics
#8
Thread Starter
Join Date: Jan 2003
Location: santa ana, ca, USA
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: my wastegate stays open at idle :( (J337_UNIT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J337_UNIT »</TD></TR><TR><TD CLASS="quote">ok quick question.. which port on the gate did u hook the vacuum line up to?</TD></TR></TABLE>
i hooked up a tube from the side of the wastegate to the turbo fitting
i hooked up a tube from the side of the wastegate to the turbo fitting
#10
Honda-Tech Member
Join Date: Mar 2003
Location: The GunShine State
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: my wastegate stays open at idle :( (egturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egturbo »</TD></TR><TR><TD CLASS="quote">
i hooked up a tube from the side of the wastegate to the turbo fitting </TD></TR></TABLE>
Take that vacuum line off the turbo fitting, and route it to a vacuum source after the throttle body (ie:somewhere off the intake manifold) I bet you it'll work after that. We had this problem last night on my buddies civic. Then go get a plug for the port on your compressor housing.
i hooked up a tube from the side of the wastegate to the turbo fitting </TD></TR></TABLE>
Take that vacuum line off the turbo fitting, and route it to a vacuum source after the throttle body (ie:somewhere off the intake manifold) I bet you it'll work after that. We had this problem last night on my buddies civic. Then go get a plug for the port on your compressor housing.
#12
Thread Starter
Join Date: Jan 2003
Location: santa ana, ca, USA
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: my wastegate stays open at idle :( (J337_UNIT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J337_UNIT »</TD></TR><TR><TD CLASS="quote">did u try and check the spring inside the wastegate?</TD></TR></TABLE>
nope how do u do that? and imma try that vacuum source thingy once i get my car back from the shop not gonna have my car for bout 2 weeks
nope how do u do that? and imma try that vacuum source thingy once i get my car back from the shop not gonna have my car for bout 2 weeks
#14
Re: my wastegate stays open at idle :( (egturbo)
open up the wastegate and check to make sure the diaphragm and spring are both seated properly.. and make sure there are no holes in the diaphragm. just undo all of the allen bolts around the housing but make sure u hold it down tight.. otherwise the spring pressure will make the top of the housing fly off
#15
Honda-Tech Member
Join Date: Aug 2003
Location: 310, Ca
Posts: 2,462
Likes: 0
Received 0 Likes
on
0 Posts
Re: my wastegate stays open at idle :( (J337_UNIT)
got my problem fix today, damn valve seat ring...somebody hit me on the head...
thanks to camp1320.com for technical support Tom..
thanks to camp1320.com for technical support Tom..
#16
Thread Starter
Join Date: Jan 2003
Location: santa ana, ca, USA
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: my wastegate stays open at idle :( (hookonboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hookonboost »</TD></TR><TR><TD CLASS="quote">got my problem fix today, damn valve seat ring...somebody hit me on the head...</TD></TR></TABLE>
good job.. getting my car back fromt he shop tomorrow. hopefully i can fix my problem
good job.. getting my car back fromt he shop tomorrow. hopefully i can fix my problem
#17
Honda-Tech Member
Join Date: Aug 2003
Location: 310, Ca
Posts: 2,462
Likes: 0
Received 0 Likes
on
0 Posts
Re: my wastegate stays open at idle :( (egturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egturbo »</TD></TR><TR><TD CLASS="quote">
good job.. getting my car back fromt he shop tomorrow. hopefully i can fix my problem </TD></TR></TABLE>
good luck with your car bro hope you get your car fix..
good job.. getting my car back fromt he shop tomorrow. hopefully i can fix my problem </TD></TR></TABLE>
good luck with your car bro hope you get your car fix..
#20
Thread Starter
Join Date: Jan 2003
Location: santa ana, ca, USA
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: my wastegate stays open at idle :( (hookonboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hookonboost »</TD></TR><TR><TD CLASS="quote">^^how's your wastegate?</TD></TR></TABLE>
not good. still open at idle. havent tried anything yet i need to know what that o ring thing is called. and which lines to hook up. white smoke comes out and **** at idle to rich u think? and my turbo laggggsss sooo bad. doesnt kick in till very high rpm's
not good. still open at idle. havent tried anything yet i need to know what that o ring thing is called. and which lines to hook up. white smoke comes out and **** at idle to rich u think? and my turbo laggggsss sooo bad. doesnt kick in till very high rpm's
#22
Thread Starter
Join Date: Jan 2003
Location: santa ana, ca, USA
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: (MusclecarGuyhasHonda)
oh and the inside of my car u can smell the exhuast makin me sick when ur wastegate was open at idle did u smell exhaust? im not gonna drive my car anymore.
#23
Honda-Tech Member
Join Date: Mar 2002
Location: MD
Posts: 4,546
Likes: 0
Received 0 Likes
on
0 Posts
Re: (egturbo)
are you sure the (excuse me... i dont know the name of this part) 'valve' is closed at idle? The little exhaust valve looking thing with a long stem on it, it connects to the membrane via 2 or 4 set screws and if these get lose the membrane cant grip the valve stem, and it will be too far open. mine was
Modified by B18EG6 at 8:40 PM 7/14/2004
Modified by B18EG6 at 8:40 PM 7/14/2004
#24
Honda-Tech Member
Join Date: May 2002
Location: Sunrise, FL, US
Posts: 704
Likes: 0
Received 0 Likes
on
0 Posts
Re: (B18EG6)
You need that ring to seal the wastegate from flowing exhaust past the valve...You do not need a gasket and I actually recommend running without a gasket...Use a Gasket for your dumptube and click the Vent from Outside Air to Recirculating Inside Cabin Air to keep the exhaust gases out...
#25
Thread Starter
Join Date: Jan 2003
Location: santa ana, ca, USA
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Sunrise City Rider)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sunrise City Rider »</TD></TR><TR><TD CLASS="quote">You need that ring to seal the wastegate from flowing exhaust past the valve...You do not need a gasket and I actually recommend running without a gasket...Use a Gasket for your dumptube and click the Vent from Outside Air to Recirculating Inside Cabin Air to keep the exhaust gases out...</TD></TR></TABLE>
yep not using gaskets. whats killing me is the stupid thing being open at idle. makin me very sick. i gotta fix this problem. i have the side of the wastegate hooked up to the nipple on the turbo.
yep not using gaskets. whats killing me is the stupid thing being open at idle. makin me very sick. i gotta fix this problem. i have the side of the wastegate hooked up to the nipple on the turbo.