Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 20
1
2
3
11
Last »
Search: Posts Made By: crx_si-r
Showing results 1 to 25 of 489
Search took 2.05 seconds.
Forum: Honda CRX / EF Civic (1988 - 1991)
05-28-2022, 11:56 PM
Replies: 2
Views: 1,853
Posted By crx_si-r

Re: 91 Si D15B7 jumper harness questions.

pretty sure you have a crappy ebay jumper. if so, look at the middle connector with the solid white wire and white wire with a black stripe. one of those 2 wires will have a splice, remove that...
Forum: Honda CRX / EF Civic (1988 - 1991)
03-26-2022, 10:24 PM
Replies: 4
Views: 2,469
Posted By crx_si-r

Re: CRX NO WINDSHILED WIPER MOTOR OR PUMP WIRING HELP!!!

The wiring is built into the main body harness that extends to the front end. So for the wiring to just be missing is highly unlikely. It is most likely just dirty/caked in grime/grease, it happens....
Forum: Honda CRX / EF Civic (1988 - 1991)
10-27-2021, 11:07 PM
Replies: 1
Views: 2,090
Posted By crx_si-r

Rfid push start 100% plug n play

Made this for a buddy. Took a $25 Amazon kit, made it true plug n play no splicing any wires....
Forum: Honda CRX / EF Civic (1988 - 1991)
10-08-2021, 09:25 PM
Replies: 9
Views: 5,952
Posted By crx_si-r

Re: 1991 Covic Si Hatchback - K20/K24A2 Swap BAR’D CA Legal

another issue would be the fuel tank pressure sensor located on the gas tank.
Forum: Honda CRX / EF Civic (1988 - 1991)
10-01-2021, 10:56 PM
Replies: 163
Views: 16,673
Posted By crx_si-r

Re: B20b california BAR

You dont want to run the factory B20B ecu, an even bigger headache if you go this route with the addition of extra sensors, DLC, FTP, etc..

Keep it simple and go obd1.
Forum: Honda CRX / EF Civic (1988 - 1991)
10-01-2021, 10:51 PM
Replies: 163
Views: 16,673
Posted By crx_si-r

Re: B20b california BAR

Yea that black box is needed for PCV.
Forum: Honda CRX / EF Civic (1988 - 1991)
09-14-2021, 10:18 PM
Replies: 7
Views: 2,373
Posted By crx_si-r

Re: Honda crx si DPFI to MPFI issue

both appear to have the same mounting points. i havent had a dpfi set up in years so i cant say 100% they are the same. but with modding the mounting tabs you should be fine....
Forum: Honda CRX / EF Civic (1988 - 1991)
09-14-2021, 10:15 PM
Replies: 7
Views: 2,373
Posted By crx_si-r

Re: Honda crx si DPFI to MPFI issue

The distributor doesnt have anything to do with there being a resistor box. the resistor box is solely related to the injectors being low impedance, not to be confused with only being obd0. there are...
Forum: Honda CRX / EF Civic (1988 - 1991)
09-13-2021, 11:47 PM
Replies: 16
Views: 2,289
Posted By crx_si-r

Re: The nightmare continues

have you checked to make sure the screw that holds the rotor in place in still there? Also make sure the spring that connects the coil to the cap is still in good condition/present.
Forum: Honda CRX / EF Civic (1988 - 1991)
09-13-2021, 10:47 PM
Replies: 7
Views: 2,373
Posted By crx_si-r

Re: Honda crx si DPFI to MPFI issue

for one, you cannot use an obd1 distributor with an obd0 ecu. you need a td02 or td18 (not sure on 2nd number). and did you also remember to swap the wires at the tps connector?

The HT04 looks to...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-28-2020, 01:37 AM
Replies: 163
Views: 16,673
Posted By crx_si-r

Re: B20b california BAR

Yes. I actually had a phone conversation with a state ref a couple months back because my buddy is needing to swap his B18a out (Ef is bard for the b18 swap already). And from what the ref told me it...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-27-2020, 08:22 PM
Replies: 0
Views: 1,407
Posted By crx_si-r

Laying some new copper

After upgrading my ground cable decided to upgrade my battery/starter cable as well...
Forum: Honda CRX / EF Civic (1988 - 1991)
01-28-2020, 07:03 PM
Replies: 7
Views: 3,169
Posted By crx_si-r

Re: 91 CRX AEM digital dash install?

all you really need is an ecu with can capability, s300 and kpro are on the list as acceptable. then its a matter of wiring in body functions that are not ecu related. such as turn signal indicators,...
Forum: Honda CRX / EF Civic (1988 - 1991)
01-28-2020, 06:46 PM
Replies: 4
Views: 1,720
Posted By crx_si-r

Re: Brand spanking new upgraded Oem style batter ground cable

https://cimg7.ibsrv.net/gimg/honda-tech.com-vbulletin/2000x1504/4e5ddce6_bf50_4aaf_910c_b3f743be0f75_1719c50f9c6469aa23b2bbfe93c300d7ef0f30d7.jpeg
Bay mounting point & trans mounting (using hydro...
Forum: Honda CRX / EF Civic (1988 - 1991)
01-28-2020, 06:44 PM
Replies: 4
Views: 1,720
Posted By crx_si-r

Re: Brand spanking new upgraded Oem style batter ground cable

it connects to the transmission as well. just like the factory one
Forum: Honda CRX / EF Civic (1988 - 1991)
01-27-2020, 11:43 PM
Replies: 4
Views: 1,720
Posted By crx_si-r

Re: Brand spanking new upgraded Oem style batter ground cable

Video for those interested

https://www.instagram.com/p/B7wtE3FH3uI/?igshid=1bnyh5vn7fze8
Forum: Honda CRX / EF Civic (1988 - 1991)
01-27-2020, 11:41 PM
Replies: 4
Views: 1,720
Posted By crx_si-r

Brand spanking new upgraded Oem style batter ground cable

https://cimg7.ibsrv.net/gimg/honda-tech.com-vbulletin/2000x1504/929e2704_7c2d_49dc_b7fa_b7f5268e8474_8566c75a1a8c55c3dbda7f256e907e708ffa35db.jpeg
Oem vs new. ...
Forum: Honda CRX / EF Civic (1988 - 1991)
10-05-2019, 06:03 PM
Replies: 25
Views: 4,568
Posted By crx_si-r

Re: Getting my ED7 BAR'D, What will Work??

I have and do make special request harnesses for bar specific. Majority of what I offer no one wants most of the emission stuff, they just want the car to start and run.

On my personal crx I have...
Forum: Honda CRX / EF Civic (1988 - 1991)
10-04-2019, 01:51 PM
Replies: 25
Views: 4,568
Posted By crx_si-r

Re: Getting my ED7 BAR'D, What will Work??

This is to ensure a'' the wiring is wired in and not dummy rigged/lost within the body wiring. They are encouraging tucked bays. Make sure your new harness has all the evap wiring as all the off the...
Forum: Honda CRX / EF Civic (1988 - 1991)
08-25-2019, 01:50 PM
Replies: 9
Views: 2,713
Posted By crx_si-r

Re: 91 ef sedan no crank no start.....

the issue is your ICU. i have dealt with this issue before. would run awesome a few times then all of a sudden click no crank. i was at the point where i swapped everything (trans, flywheel, starter...
Forum: Honda CRX / EF Civic (1988 - 1991)
08-20-2019, 02:01 AM
Replies: 2
Views: 3,326
Posted By crx_si-r

Re: THEY ARE FINISHED...EF SPECIFC FIREWALL MOUNTING PLATES!!!

https://cimg6.ibsrv.net/gimg/honda-tech.com-vbulletin/1080x1350/img_20190819_194137_189_82e5dbe38fce673bf24ec3eeec3ac86afcc6a117.jpg
Drill template ...
Forum: Honda CRX / EF Civic (1988 - 1991)
08-16-2019, 05:44 PM
Replies: 2
Views: 3,326
Posted By crx_si-r

THEY ARE FINISHED...EF SPECIFC FIREWALL MOUNTING PLATES!!!

I picked up a batch on Monday, upon inspection found the updated specs were not added in. Called the shop next day, and they corrected the issue. I'm having some drinking templates made for easy...
Forum: Honda CRX / EF Civic (1988 - 1991)
05-15-2019, 12:33 AM
Replies: 1
Views: 1,713
Posted By crx_si-r

LOOK WHAT I GOT CUSTOM MADE FOR MY CRX...

Got a few of these made...got tired of seeing the universal square milpsec connector mounting plates...so i had my local machine shop make these specific for the EF chassis. i literally brought them...
Forum: For Sale
12-26-2018, 12:43 AM
Replies: 15
Views: 2,366
Posted By crx_si-r

Re: AEM "pencil " COP kit and AEM B-series fuel rail

300 shipped for aem cop kit
Forum: Honda CRX / EF Civic (1988 - 1991)
12-26-2018, 12:35 AM
Replies: 2
Views: 1,666
Posted By crx_si-r

Re: Em1 t bracket

no. 90-93 da or hasport sells one that is compatible with cable and hydro trans
Showing results 1 to 25 of 489
 
Page 1 of 20
1
2
3
11
Last »


 
Forum Jump


All times are GMT -8. The time now is 05:27 AM.