SoCal-GT35R,gsr,b16,quaife,lsd,rc injectors,portflow,si,itr,tilton,je,crower,sparco, arp,aebs,cometic
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: where the rich reside, ca, us
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
SoCal-GT35R,gsr,b16,quaife,lsd,rc injectors,portflow,si,itr,tilton,je,crower,sparco, arp,aebs,cometic
*Stock OBD2 GSR ecu-50
*K&N air filter-10
*Complete Turbo Kit brand NEW w/GT35R.-2200
*GT35R/.70ar NEW-950
*Skunk2 turbo cams NEW-450
*Exedy full face sprung clutch, used but in great condition-200 obo
*Unorthadox Racing pulleys spec R-150
*Mr.Gasket exhaust cut out-40
*New Quaife LSD ITR/B16 with new honda bearings-800
*Quaife LSD slightly used gsr with new honda bearings-750
*Oil catch cans, I have 2, 1 with a visual meter-30 each
*2 gsr starters-40 each
*2 B16/ITR distributers 1 with msd nipple-120 each
*AEBS pro spec gsr Head studs NEW-90
*ARP gsr main studs NEW-90
*Skunk2 stage2 cams and gears-550 or 450 cams and 125 gears
*Cometic 86mm headgasket NEW-80
*Cometic 86.5mm headgasket NEW 80
*ACL bearing kit for gsr-100
*GSR timing belt NEW-40
*OBD2 conversion harnes to OBD1- 80
*Golden Eagle cam cap NEW-10
*RC 550cc injectors with stock fuel rail-225
*STR pro series anodized blue fuel rail NEW-80
*GSR crank pulley-25
*68mm Throttle body with all sensors-250
*NGK pro spec iridium spark plugs 9's 2 sets NEW-20
*GSR water pump neck- make offer
*GSR shift linkage with type R shift ****-80
*JUN3 stage3 cam copies tested back to back with real JUNS and produced the same #'s-350
*cam caps and cam rails with all necassary head bolts-make offer
*GSR windage tray-make offer
*Mugen Jasma header, slight damage on bottom fixable with o2 sensor-350
*2000 ITR JDM headers with custom skid plate to protect the bottom with o2 sensor-350
*GSR half shaft- make offer
*Sparco replica steering wheel-30
* Advanced Competition Intake manifold Great for High HP All Motor cars or Turbo- Retail, 950/ sale 450
*JG Edlebrock Intake mainfold-150-SOLD
*Skunk2 Intake manifold- 100-SOLD
*2000si B16 tranny Quaife lsd with new honda bearings, ITR final drive kit, ats first gear, tranny is perfect-1400. Keep in mind how much labor went into this.
*93 gsr Cable tranny rebuilt by Erick's Racing Perfect condition-600
*Darton tall deck gsr block deck height 226mm sleeved and ready to go-Retail $2199/ asking1500
*GSR block restamped b16 for street racing purposes, Sleeved with 86.5mm wiesco pistons lateral gas ports, and 95mm custom crank, IB spec rods. I will sale assembled or I can part it out. Everything in the block is brand new and has never been run.-2200
*Portflow B16 head, Made 250whp on a basic gsr 12.5:1comp setup, I have vouches Head has Valves, springs, retainers, guides. Cams and Gears are optional-1200
*GSR portflow head, valve springs, retainers, guides-900
*J.E Pistons 9:1comp NEW-375
*Crower Rods specifically for a 95mm crank in a Bseries AllMotor or Turbo use NEW-280
*5GAL barrel or c16 race fuel-70
*TILTON TWIN DISC with 6.5 pound custom tilton flywheel NEW-1200
*MOMO Extreme Formula seats oneis carbon kevlar the other is fiber glass, NEW-600 each
*MOMO 3inch wide 6 point seatbelt harness with MOMO shoulder pads 2 sets-175 each
*Sabelt harness-40
*MOMO harness 2 sets-40
*2000 si rear suspension, rotors, calipers. arms-100
*All types of interior pieces for integra, eg, and 2000 si. Make offers
*ITR strut bar-100
*Full race cross member traction bar, NEW-270
*EG Lakewood cross member traction bar, NEW-250
*Mugen twin loop with cat back piping for a 2000 si with 02 sensor-500
*2 rear hatch doors one is cut for weight-20 each
*Moto GP full racing leather suit with rear hump, Moviestar/telefonica-500
*2000 Acura integra gsr doors, black leather panels, frost white perfect condition-200
*Civic eg hood off 92 cx, couple tiny dings-30
Everything is negotiable. Call 949-500-8662 ask for Ken or you can e-mail me @ OnceMariposa@gmail.com< I check my mail about 5 times a day!
Thankyou for l@@king.
*K&N air filter-10
*Complete Turbo Kit brand NEW w/GT35R.-2200
*GT35R/.70ar NEW-950
*Skunk2 turbo cams NEW-450
*Exedy full face sprung clutch, used but in great condition-200 obo
*Unorthadox Racing pulleys spec R-150
*Mr.Gasket exhaust cut out-40
*New Quaife LSD ITR/B16 with new honda bearings-800
*Quaife LSD slightly used gsr with new honda bearings-750
*Oil catch cans, I have 2, 1 with a visual meter-30 each
*2 gsr starters-40 each
*2 B16/ITR distributers 1 with msd nipple-120 each
*AEBS pro spec gsr Head studs NEW-90
*ARP gsr main studs NEW-90
*Skunk2 stage2 cams and gears-550 or 450 cams and 125 gears
*Cometic 86mm headgasket NEW-80
*Cometic 86.5mm headgasket NEW 80
*ACL bearing kit for gsr-100
*GSR timing belt NEW-40
*OBD2 conversion harnes to OBD1- 80
*Golden Eagle cam cap NEW-10
*RC 550cc injectors with stock fuel rail-225
*STR pro series anodized blue fuel rail NEW-80
*GSR crank pulley-25
*68mm Throttle body with all sensors-250
*NGK pro spec iridium spark plugs 9's 2 sets NEW-20
*GSR water pump neck- make offer
*GSR shift linkage with type R shift ****-80
*JUN3 stage3 cam copies tested back to back with real JUNS and produced the same #'s-350
*cam caps and cam rails with all necassary head bolts-make offer
*GSR windage tray-make offer
*Mugen Jasma header, slight damage on bottom fixable with o2 sensor-350
*2000 ITR JDM headers with custom skid plate to protect the bottom with o2 sensor-350
*GSR half shaft- make offer
*Sparco replica steering wheel-30
* Advanced Competition Intake manifold Great for High HP All Motor cars or Turbo- Retail, 950/ sale 450
*JG Edlebrock Intake mainfold-150-SOLD
*Skunk2 Intake manifold- 100-SOLD
*2000si B16 tranny Quaife lsd with new honda bearings, ITR final drive kit, ats first gear, tranny is perfect-1400. Keep in mind how much labor went into this.
*93 gsr Cable tranny rebuilt by Erick's Racing Perfect condition-600
*Darton tall deck gsr block deck height 226mm sleeved and ready to go-Retail $2199/ asking1500
*GSR block restamped b16 for street racing purposes, Sleeved with 86.5mm wiesco pistons lateral gas ports, and 95mm custom crank, IB spec rods. I will sale assembled or I can part it out. Everything in the block is brand new and has never been run.-2200
*Portflow B16 head, Made 250whp on a basic gsr 12.5:1comp setup, I have vouches Head has Valves, springs, retainers, guides. Cams and Gears are optional-1200
*GSR portflow head, valve springs, retainers, guides-900
*J.E Pistons 9:1comp NEW-375
*Crower Rods specifically for a 95mm crank in a Bseries AllMotor or Turbo use NEW-280
*5GAL barrel or c16 race fuel-70
*TILTON TWIN DISC with 6.5 pound custom tilton flywheel NEW-1200
*MOMO Extreme Formula seats oneis carbon kevlar the other is fiber glass, NEW-600 each
*MOMO 3inch wide 6 point seatbelt harness with MOMO shoulder pads 2 sets-175 each
*Sabelt harness-40
*MOMO harness 2 sets-40
*2000 si rear suspension, rotors, calipers. arms-100
*All types of interior pieces for integra, eg, and 2000 si. Make offers
*ITR strut bar-100
*Full race cross member traction bar, NEW-270
*EG Lakewood cross member traction bar, NEW-250
*Mugen twin loop with cat back piping for a 2000 si with 02 sensor-500
*2 rear hatch doors one is cut for weight-20 each
*Moto GP full racing leather suit with rear hump, Moviestar/telefonica-500
*2000 Acura integra gsr doors, black leather panels, frost white perfect condition-200
*Civic eg hood off 92 cx, couple tiny dings-30
Everything is negotiable. Call 949-500-8662 ask for Ken or you can e-mail me @ OnceMariposa@gmail.com< I check my mail about 5 times a day!
Thankyou for l@@king.
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: where the rich reside, ca, us
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Re: SoCal-GT35R,gsr,b16,quaife,lsd,rc injectors,portflow,si,itr,tilton,je,crower,sparco, arp,aebs,com
Im not sure what the deal is with my pm's but they never come up? Feel free to call or email me, if that's to much of a hastle you can hit me threw the post, thanks for looking.
#4
Honda-Tech Member
iTrader: (2)
Join Date: Dec 2003
Location: The heart of cat bong
Posts: 24,554
Likes: 0
Received 0 Likes
on
0 Posts
Re: SoCal-GT35R,gsr,b16,quaife,lsd,rc injectors,portflow,si,itr,tilton,je,crower,sparco, arp,aebs,com
Im at work now so I cannot call.
Try clicking the "IM" under my Avatar, see if it comes up.
I asked you if you're interested in trades.
Try clicking the "IM" under my Avatar, see if it comes up.
I asked you if you're interested in trades.
Trending Topics
#12
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: where the rich reside, ca, us
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Re: SoCal-GT35R,gsr,b16,quaife,lsd,rc injectors,portflow,si,itr,tilton,je,crower,sparco, arp,aebs,com
dont recieve pms for some reason, u can email or feel free to call or use thread.
#18
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: where the rich reside, ca, us
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Mr.OB*GYN_Rhett)
I'm in New York until the 9th but I will do my best to still communicate with u guys.
MY PM'S DONT WORK- EMAIL ME PLEASE.
MY PM'S DONT WORK- EMAIL ME PLEASE.
#20
Honda-Tech Member
Join Date: Feb 2005
Location: Kansas City, MO, US
Posts: 3,979
Likes: 0
Received 0 Likes
on
0 Posts
still have the "GSR crank pulley-25"? is this the timing belt drive pulley, the gear that goes on the end of the crank, outside the oil pump? please let me know ASAP, thanks!
jo
913-687-2044
jo
913-687-2044
#21
Honda-Tech Member
iTrader: (2)
Join Date: Dec 2003
Location: The heart of cat bong
Posts: 24,554
Likes: 0
Received 0 Likes
on
0 Posts
Re: (kennethAlexanderINC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kennethAlexanderINC »</TD></TR><TR><TD CLASS="quote">I'm in New York until the 9th but I will do my best to still communicate with u guys.
MY PM'S DONT WORK- EMAIL ME PLEASE.</TD></TR></TABLE>
MY PM'S DONT WORK- EMAIL ME PLEASE.</TD></TR></TABLE>
#23
Honda-Tech Member
Join Date: Jun 2007
Location: Elyria, Ohio
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts