parts F/S thred. h22 turbo motor, jdm b16 block, darton sleeved h22 block, 2000 civic si
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: west chester, pa, usa
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
parts F/S thred. h22 turbo motor, jdm b16 block, darton sleeved h22 block, 2000 civic si
all these parts were sold, old post, delete
Last edited by jo6wo; 01-22-2009 at 05:51 PM.
#3
Junior Member
Join Date: Mar 2008
Location: Reese, MI, US
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts F/S thred. h22 turbo motor, jdm b16 block, darton sleeved h22 block, 2000 civic si (jo6wo)
Could you email me some pics of the Darton block?
REF: darton sleeved 90mm usdm h22 block and crank. fresh sleeve, never ran $ 500
If those are MIB/open deck sleeves, you have a deal.
michael.james.cunningham@us.army.mil
V/r,
Mike
REF: darton sleeved 90mm usdm h22 block and crank. fresh sleeve, never ran $ 500
If those are MIB/open deck sleeves, you have a deal.
michael.james.cunningham@us.army.mil
V/r,
Mike
#7
Junior Member
Join Date: Feb 2008
Location: Somewhere, PA, US and A Greatest Country in D World
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts F/S thred. h22 turbo motor, jdm b16 block, darton sleeved h22 block, 2000 civic si (jo6wo)
hey man..how far are you from pgh...im looking for a manual grey drivers door panel and stereo dash bezel...if you can help me out...
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Oct 2008
Location: west chester, pa, usa
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
i have the door, with manual panal. dont have any stereo bezels. i must be far from pgh, cause i have no idea where that is. im going to assume pittsburg. im in west chester pa, 20 minutes west of philly
#12
Junior Member
Thread Starter
Join Date: Oct 2008
Location: west chester, pa, usa
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
bump bump bump, just got a 97 4 door tonight, for parts, anyone need anything off this car let me know, good doors. good glass, trunk, suspention, interior, dash.
#17
Junior Member
Thread Starter
Join Date: Oct 2008
Location: west chester, pa, usa
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
i took a deposit on it, if the dude falls through in a week it will be back up forsale and his deposit will be refunded. i still have all th other parts. and a few new swaps. anyone going to honda day at atco on the 8th ?
#18
Honda-Tech Member
Join Date: Sep 2007
Location: Nashville, TN, davidson
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
how much for the h22 skunk2 pro series intake manifold shipped to Nashville Tn 37206
Email me @ khmer3@comcast.net
Email me @ khmer3@comcast.net
#22
Junior Member
Join Date: Mar 2008
Location: Reese, MI, US
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts F/S thred. h22 turbo motor, jdm b16 block, darton sleeved h22 block, 2000 civic si (jo6wo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jo6wo »</TD></TR><TR><TD CLASS="quote">
fully build jdm darton sleeved 90mm h22 turbo motor, eagle crank, eagle h beam rods. oem honda bearings. wiesco turbo pistons. hondata headgasket., spec b toda cams, kms valvetrain. this motor made 535 hP to the wheels on 20lbs of boost made about 15 passes., parting out everything $ 3000 for the motor complete from oil pan to valve cover
jdm lsd type r trans, polished casing, complete with axles/linkage/clutch 1100
</TD></TR></TABLE>
I'm intrested in these 2, but I have a few questions:
1) Wiseco makes 90mm pistons for the h22?
2) Eagle makes a Crank for the h22?
3) How did you get B16 cams to FIT in an h22 head?
4) 535hp was on what... a 200 shot of nitrous?
5) Which transmission is this? and which LSD? OEM? OBX? etc...
V/r,
Mike
fully build jdm darton sleeved 90mm h22 turbo motor, eagle crank, eagle h beam rods. oem honda bearings. wiesco turbo pistons. hondata headgasket., spec b toda cams, kms valvetrain. this motor made 535 hP to the wheels on 20lbs of boost made about 15 passes., parting out everything $ 3000 for the motor complete from oil pan to valve cover
jdm lsd type r trans, polished casing, complete with axles/linkage/clutch 1100
</TD></TR></TABLE>
I'm intrested in these 2, but I have a few questions:
1) Wiseco makes 90mm pistons for the h22?
2) Eagle makes a Crank for the h22?
3) How did you get B16 cams to FIT in an h22 head?
4) 535hp was on what... a 200 shot of nitrous?
5) Which transmission is this? and which LSD? OEM? OBX? etc...
V/r,
Mike
#23
Honda-Tech Member
Join Date: Oct 2007
Location: oak island, nc, usa
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
#25
Honda-Tech Member
Join Date: Feb 2008
Location: N. Florida
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts F/S thred. h22 turbo motor, jdm b16 block, darton sleeved h22 block, 2000 c
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jo6wo »</TD></TR><TR><TD CLASS="quote">
fully build jdm darton sleeved 90mm h22 turbo motor, eagle crank, eagle h beam rods. oem honda bearings. wiesco turbo pistons. hondata headgasket., spec b toda cams, kms valvetrain. this motor made 535 hP to the wheels on 20lbs of boost made about 15 passes., parting out everything $ 3000 for the motor complete from oil pan to valve cover
jdm lsd type r trans, polished casing, complete with axles/linkage/clutch 1100
</TD></TR></TABLE>
I'm intrested in these 2, but I have a few questions:
1) Wiseco makes 90mm pistons for the h22?
2) Eagle makes a Crank for the h22?
3) How did you get B16 cams to FIT in an h22 head?
4) 535hp was on what... a 200 shot of nitrous?
5) Which transmission is this? and which LSD? OEM? OBX? etc...
V/r,
Mike
fully build jdm darton sleeved 90mm h22 turbo motor, eagle crank, eagle h beam rods. oem honda bearings. wiesco turbo pistons. hondata headgasket., spec b toda cams, kms valvetrain. this motor made 535 hP to the wheels on 20lbs of boost made about 15 passes., parting out everything $ 3000 for the motor complete from oil pan to valve cover
jdm lsd type r trans, polished casing, complete with axles/linkage/clutch 1100
</TD></TR></TABLE>
I'm intrested in these 2, but I have a few questions:
1) Wiseco makes 90mm pistons for the h22?
2) Eagle makes a Crank for the h22?
3) How did you get B16 cams to FIT in an h22 head?
4) 535hp was on what... a 200 shot of nitrous?
5) Which transmission is this? and which LSD? OEM? OBX? etc...
V/r,
Mike
Thread
Thread Starter
Forum
Replies
Last Post