Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM
03-04-2004, 02:59 PM
#1
Thread Starter
Join Date: Aug 2003
Location: Northern, California, USA
Posts: 1,405
Likes: 0
Received 0 Likes
on
0 Posts
Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM
<FONT SIZE="3">Check back on this thread, as alot if being added and deleted as its sold and made availible</FONT>
Lets start off with the good stuff:
<FONT SIZE="4">lowered price</FONT>
RS Machines b18a1 block (Sleeved to 2.0L), has weisco 12.5:1 pistons with eagle rods, z10 block girdle, balanced LS crank, new OEM honda bearings, GSR oilpan/windage/pickup, ITR water pump and oil pump, ARP headstuds, and b20 OEM honda headgasket (0 miles on everything, been idled for like 30 mins max, everything works! rings arnt seated, basically brand new: Taking offers, but asking $2300 + shipping
Full-race VTEC dowels: 30$+shipping
Fluidyne Radiator for g2 integra (90-93) w/ fans - 250$ + shipping
Vtec solenoid - make offer
Crane cams ignition w/ fireball coil - 100$
Once again, everything HAS been ran (idled), no passes, no mashing, So I DO KNOW it all works. Parts should be availible Monday, march 8th.
93 front bumper, in good condition (no cracks or major damage), with JDM bumper support - 175 for both.
Ben Ogle rear bar set:
Rear lower tie
Rear strut
Rear Strong
fitment was great, all are powercoated black.
XM Satillite radio setup -
its the delphi skyfi unit, comes with the unit itself, tape deck car kit, and the portable boombox.
Learn more: http://shopdelphi.com/products/consumers/skyfi/
subscription is only 10 $ a month to XM...clear as hell, comes in EVERYWHERE, great stations...need to sell to pay for car.
asking 175$ for everything, comes with 2 year PSP at best buy.
--------------------------------------------------------
All parts are from a 93 integra (OBD1)
2 ABS axles - brand new. - make offer
93 integra 2 door seats, grey leather, all 4.
1 cargo cover
2 sunroof assemblys ( both work )
3 full doors without doorpanels (2 white d/p, 1 red d)
4 stock mirrors (2 white, 2 aztec green)
1 full dash
all windows
2 cruise control units
LS intake mani w/fuel rail (bare, no TB or injectors) - 45$
LS flywheel (off 93) - make offer
B18A1 (PR4) Pistons (4)
B18A1 Oilpump (100K, worked fine when took out)
B18A1 Waterpump (40 K, worked fine when took out)
B18A1 Headbolts (2 are on way to stripping, others are fine)
B16A stock cams/camgears
2 DC stainless bottom halves, will bolt up to any DC matching connection.
1 top half of an exhaust manifold, wont fit on ls...
working cruise control off my 93 GS - Make offer
Anything that was under the dash (Heater core, Vent fan...ect ect...) - make offers
Clifford Arrow 3 alarm, everything works, all is pre wired for integra GS, can get wire color codes from any stereo shop to install yourself. - 60$ shipped.
Got all front polyurethane bushings installed, come pick them up. - make offer
All air conditioning parts still availible!!
-----------------------------------------------------
Also have an aztec green GSR shell availible for 50$, it is clean.
email - <FONT SIZE="5">chris@allmotor.net</FONT>
aim: Gotti for hire
Modified by chris@allmotor.net at 2:56 PM 3/18/2004
Modified by chris@allmotor.net at 2:56 PM 3/18/2004
Modified by chris@allmotor.net at 10:16 PM 4/9/2004
Modified by chris@allmotor.net at 10:17 PM 4/9/2004
Modified by chris@allEGGROLL.net at 10:54 PM 4/12/2004
Lets start off with the good stuff:
<FONT SIZE="4">lowered price</FONT>
RS Machines b18a1 block (Sleeved to 2.0L), has weisco 12.5:1 pistons with eagle rods, z10 block girdle, balanced LS crank, new OEM honda bearings, GSR oilpan/windage/pickup, ITR water pump and oil pump, ARP headstuds, and b20 OEM honda headgasket (0 miles on everything, been idled for like 30 mins max, everything works! rings arnt seated, basically brand new: Taking offers, but asking $2300 + shipping
Full-race VTEC dowels: 30$+shipping
Fluidyne Radiator for g2 integra (90-93) w/ fans - 250$ + shipping
Vtec solenoid - make offer
Crane cams ignition w/ fireball coil - 100$
Once again, everything HAS been ran (idled), no passes, no mashing, So I DO KNOW it all works. Parts should be availible Monday, march 8th.
93 front bumper, in good condition (no cracks or major damage), with JDM bumper support - 175 for both.
Ben Ogle rear bar set:
Rear lower tie
Rear strut
Rear Strong
fitment was great, all are powercoated black.
XM Satillite radio setup -
its the delphi skyfi unit, comes with the unit itself, tape deck car kit, and the portable boombox.
Learn more: http://shopdelphi.com/products/consumers/skyfi/
subscription is only 10 $ a month to XM...clear as hell, comes in EVERYWHERE, great stations...need to sell to pay for car.
asking 175$ for everything, comes with 2 year PSP at best buy.
--------------------------------------------------------
All parts are from a 93 integra (OBD1)
2 ABS axles - brand new. - make offer
93 integra 2 door seats, grey leather, all 4.
1 cargo cover
2 sunroof assemblys ( both work )
3 full doors without doorpanels (2 white d/p, 1 red d)
4 stock mirrors (2 white, 2 aztec green)
1 full dash
all windows
2 cruise control units
LS intake mani w/fuel rail (bare, no TB or injectors) - 45$
LS flywheel (off 93) - make offer
B18A1 (PR4) Pistons (4)
B18A1 Oilpump (100K, worked fine when took out)
B18A1 Waterpump (40 K, worked fine when took out)
B18A1 Headbolts (2 are on way to stripping, others are fine)
B16A stock cams/camgears
2 DC stainless bottom halves, will bolt up to any DC matching connection.
1 top half of an exhaust manifold, wont fit on ls...
working cruise control off my 93 GS - Make offer
Anything that was under the dash (Heater core, Vent fan...ect ect...) - make offers
Clifford Arrow 3 alarm, everything works, all is pre wired for integra GS, can get wire color codes from any stereo shop to install yourself. - 60$ shipped.
Got all front polyurethane bushings installed, come pick them up. - make offer
All air conditioning parts still availible!!
-----------------------------------------------------
Also have an aztec green GSR shell availible for 50$, it is clean.
email - <FONT SIZE="5">chris@allmotor.net</FONT>
aim: Gotti for hire
Modified by chris@allmotor.net at 2:56 PM 3/18/2004
Modified by chris@allmotor.net at 2:56 PM 3/18/2004
Modified by chris@allmotor.net at 10:16 PM 4/9/2004
Modified by chris@allmotor.net at 10:17 PM 4/9/2004
Modified by chris@allEGGROLL.net at 10:54 PM 4/12/2004
03-04-2004, 03:47 PM
#4
Trial User
Re: Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM (chris@all
that head is a bitchin deal
keep in mind:
pr3 is 200-300
portflow valve job and port work 1000
rev valves are 250 ish
itr lmas are at least 200
portflow valve train is 350ish
thats over 2000 worth of stuff
keep in mind:
pr3 is 200-300
portflow valve job and port work 1000
rev valves are 250 ish
itr lmas are at least 200
portflow valve train is 350ish
thats over 2000 worth of stuff
03-04-2004, 04:15 PM
#6
Honda-Tech Member
Join Date: Oct 2002
Location: chillin in that city called queen creek, but homes the atl
Posts: 3,518
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM (chris@all
sale pending already hell u just put it on here
03-04-2004, 04:17 PM
#7
Join Date: Jul 2003
Location: yonkers, n.y., U.S.
Posts: 1,763
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM (chris@all
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by speedyonez »</TD></TR><TR><TD CLASS="quote"> 
.......bump!</TD></TR></TABLE>what header is that
.......bump!</TD></TR></TABLE>what header is that
Trending Topics
03-04-2004, 04:58 PM
#8
Join Date: Oct 2003
Location: U.O.P stockton, Ca, unitedstates
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM (chris@all
TTT^^^ for a good seller
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM2ndGen »</TD></TR><TR><TD CLASS="quote">what header is that</TD></TR></TABLE>
that is what you call a DANNY special... 2.0 DTR street header
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM2ndGen »</TD></TR><TR><TD CLASS="quote">what header is that</TD></TR></TABLE>
that is what you call a DANNY special... 2.0 DTR street header
03-04-2004, 05:04 PM
#9
Join Date: Jul 2003
Location: yonkers, n.y., U.S.
Posts: 1,763
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM (chris@all
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dvsef »</TD></TR><TR><TD CLASS="quote">TTT^^^ for a good seller
that is what you call a DANNY special... 2.0 DTR street header </TD></TR></TABLE>i thought it was a DTR ...nice lookin header ...thats what im thinking about running ...or a DTR side exit ...i cant decide 
that is what you call a DANNY special... 2.0 DTR street header
</TD></TR></TABLE>i thought it was a DTR ...nice lookin header ...thats what im thinking about running ...or a DTR side exit ...i cant decide
03-04-2004, 07:01 PM
#11
Honda-Tech Member
Join Date: Oct 2002
Location: chillin in that city called queen creek, but homes the atl
Posts: 3,518
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM (chris@all
the head is sold payment sent 
03-04-2004, 07:13 PM
#13
Thread Starter
Join Date: Aug 2003
Location: Northern, California, USA
Posts: 1,405
Likes: 0
Received 0 Likes
on
0 Posts
Re: (speedyonez)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by speedyonez »</TD></TR><TR><TD CLASS="quote">well , hope your happy with it .... i tryd to put a down payment first and he said pretty much it was mine ... how i got beat to it i dunno</TD></TR></TABLE>
like I said, im sorry, ive always done first money first serve...
like I said, im sorry, ive always done first money first serve...
03-04-2004, 10:00 PM
#18
Join Date: Oct 2003
Location: Bay Area, CA, United States
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Re: (chris@allmotor.net)
Nooooooooooooooooooooooooooooo why why why!!!!!!! That motor was so beautiful!!!!!!! gah!!!!! BUmp for the 707i ex-pimp. How much for the header? Check pm
03-05-2004, 10:29 AM
#20
Honda-Tech Member
Join Date: Sep 2000
Location: Sears Point, CA
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: (chris@allmotor.net)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chris@allmotor.net »</TD></TR><TR><TD CLASS="quote">im norcal, s1 tranny is a b16 tranny...this one has an OEM LSD</TD></TR></TABLE>
Sold...I've sent you an IM, if needed I can pick it up tonight.
Austin
Sold...I've sent you an IM, if needed I can pick it up tonight.
Austin
03-05-2004, 05:54 PM
#24
Join Date: Jul 2003
Location: Milptias, ca, Usa
Posts: 1,120
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM (chris@all
what are the current offers you have got?..
what are you lookin to get for this motor?..
are you up for trades?...
what are you lookin to get for this motor?..
are you up for trades?...
03-05-2004, 10:59 PM
#25
Thread Starter
Join Date: Aug 2003
Location: Northern, California, USA
Posts: 1,405
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parting out race motor! JUN, JG, PORTFLOW, RS MACHINES, ENDYN, z10, ITR, HONDATA, AEM (chris@all
no trades, the head, tranny, fuel rail & fpr are sold. Block is still for sale if anyone is interested.