Freshdot

EMAIL IS THE BEST CONTACT METHOD:SJOYCE14@GMAIL.COM

LOCATION: QUEENS, NY

My last thread got a bit messy and I'm still getting a lot of emails regarding sold parts. Here is the revised version, only the parts LISTED are for sale.

I have stack of used parts and a few BNIB parts

**Please respect my time and not bother me with photo requests for a brand new OEM rear main seal, etc**

**ALL PRICES ARE OBO**
- Shipping and Paypal fees will be negotiated upon sale.
- Discounts for multiple items.

USED PARTS:

**ALL PARTS HAVE APPROX 2000 MILES UNLESS OTHERWISE NOTED, THIS CAR WAS BUILT IN ONE SHOT!!**

Engine:

- D16Z6 Head Complete w/
- Bisimoto 2.4 Turbo Cam, Springs, and Retainers. Supertech Valves, and AEM Cam Gear: $800
- **I had intentions on rebuilding this car, as such this head was resurfaced, hence why it's packaged shiny and new**

- Bottom End:
- D16Z6 75.5 CP Pistons with Scat H Beam Rods and ARP 2000 Bolts: $650

- I Believe these can be used with other D - Series Engines, do your homework.
- One Piston was replaced with a brand new in box unit that's included in the sale. I damaged one during disassembly, long story.
- Piston tops have light scratches from using a screw driver to find TDC - they were run like this, and I'm positive this has no effect on performance.
- I cleaned up one piston just to show their overall condition.
- Throwing in OEM Thrust Bearings.


- OEM D16Z6 Crank: $100
- OEM D16Z6 Oil Pump: $75
- OEM D16Z6 Tensionor: $40
- OEM D16Z6 Water Pump: $40
- Gates Racing Timing Belt: $40
- OEM D16Z6 Dizzy: $50
- OEM Starter: $50
- OEM Alternator: $50


Transmission:

- D16 S20 Transmission with FULL Synchrotech Carbon Master Rebuild Kit: $300
- Brass Synchros with Carbon Lining with all OEM Bearings and Seals SHIFTS PERFECT
- Competition Stage 4 Clutch: $250
- Competition Ultra Lightweight Flywheel 8.8 Lbs: $150

Cooling:

- Mishimoto Radiator with Shroud and Fan: also includes NSX Rad Cap: $250


Suspension/Chassis:

- Hasport Engine Mounts P/N: DCSTK Race 70A: $250
- These just need a nice metal polish to look new again.
- Skunk2 Rear LCA's: $100 - New bushings needed.
- Suspension Techniques 25mm Front and 19mm Rear Sway Bars: $300 (prefer selling as a pair)

- Chassis Mounted Front Splitter: $200
- I do not currently have my own pictures of this, here is a link to the original creator/owner's thread, this is the exact item in my possession, please copy and paste link:

my diy front splitter - Honda-Tech


MISC:

- OEM Honda Mud Guards for 1993 Civic Coupe, I don't know how I ended up with 5, but you get all 5: $50


BRAND NEW IN BOX PARTS:

Engine:

- OEM D16Z6 Head Gasket (BNIB): $50
- Misc OEM D16Z6 Gaskets and Seals, Valve Cover, Rear Main, Oil, etc. The part numbers are shown below, I'd rather not separate this stuff $50 takes the whole lot.

Brakes:

- Power Stop K699 Brake Kit: Front Cross/Slotted Rotors and Pads (BNIB): $75
- Dorman Brake Master Cylinder: $20

Bushings/Wheel Studs/Bearings:

- Energy Suspension Bushings:
- Front Control Arm 16.3105R Kit: $30
- Front Shock Kit 16.8102R Kit: $15
- Rack and Pinion 16.10102R Kit: $10

- Moog Lower Ball Joints Pair: $50

mn99si

How much for Buddy Club Suspension + ST Sway Bars + LCA's?

Freshdot

I sure am glad that I wrote, EMAIL ME in big bold red letters at the top of the post.

Freshdot

bumppppppp

Freshdot

bump

403CRX

Interested in cams, springs, retainers, valves and cam gear. And maybe the transmission after I do a little more research