MD,DC,VA huge sell!! everything must go CRX,b16,JDM tons of parts!
#1
Thread Starter
Join Date: Oct 2002
Location: St. Inigoes, MD, United States
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
MD,DC,VA huge sell!! everything must go CRX,b16,JDM tons of parts!
ACT (HD) Organic Street Disc $420.00
AEM CAI system $189.00
Apexi Rev/Speed Meter with G-Sensor $260.00
Apexi V-AFC $300.00
ARP Head Studs $140.00
B16A JDM Bare Block $200.00
B&M Fuel Pressure Regulator and Gauge $80.00
OEM B16 Bottom & Top -End Gasket Kit $224.00
C&R Racing Full Length Rad $375.00
Energy Suspension Hyper-Flex System $130.00
Findanza Ultra Light Flywheel $275.00
Goodridge Steel Braided Brake Lines $70.00
Gude Head Package $1,500.00
HASPORT B-series Shift Linkage (EF) $150.00
Mugen Fan Switch "Thermoswitch $45.00
Mugen Low-Temp B-Series Thermostat $70.00
Mugen Leather Shift Boot $100.00
Real & Rare Mugen Steering Wheel $230.00
Place Racing Front Crossmember (EF) $190.00
Place Racing Throttle Cable Bracket (EF) $15.00
Powerstop Crossdrilled Front and Rear Rotors $170.00
SiR Front End Conversion $700.00
Skunk 2 Dual Bend Short Shifter $100.00
Sparco Fuel Door $130.00
STR Racing Adj. Cam Gears $210.00
STR B16 Block Guard $100.00
STR Racing Fuel Rail $130.00
Tien SS coilover system $1,000.00
Unorthodox Racing Ultra A Alternator Pully $64.00
Unorthodox Racing Ultra R Underdrive Pully $165.00
Total: $7,732.00
1990 CRX SI rolling chassis with TOKICO ILLUMINA 6 way adjustable shocks and Skunk Works Coilovers, Energy Suspension Hyper-Flex Systems, Place Racing Crossmember, Place Racing Motor Mounts, Powerstop Front and Rear Crossdrilled rotors, AEM brake pads, Full 3inch custom cat back exhaust all installed. It also comes with 2 sets of doors, 2 sunroofs, and 2 hatches. I have a full JDM SiR Front end conversion that comes with fenders, hood, headlights, corner lights, side markers, and front bumper with lip. Full interior with the factory Recaros which is all in perfect condition. The Gude head package consists of port and polished intake and exhaust ports, 3 angle valve job, port matched intake manifold, oversized and port matched throttle body, Gude cams, and tuned ECU.
Would like to sell as a package for around $6000 OBO
If no offers for package I will part it out just make offers.
AEM CAI system $189.00
Apexi Rev/Speed Meter with G-Sensor $260.00
Apexi V-AFC $300.00
ARP Head Studs $140.00
B16A JDM Bare Block $200.00
B&M Fuel Pressure Regulator and Gauge $80.00
OEM B16 Bottom & Top -End Gasket Kit $224.00
C&R Racing Full Length Rad $375.00
Energy Suspension Hyper-Flex System $130.00
Findanza Ultra Light Flywheel $275.00
Goodridge Steel Braided Brake Lines $70.00
Gude Head Package $1,500.00
HASPORT B-series Shift Linkage (EF) $150.00
Mugen Fan Switch "Thermoswitch $45.00
Mugen Low-Temp B-Series Thermostat $70.00
Mugen Leather Shift Boot $100.00
Real & Rare Mugen Steering Wheel $230.00
Place Racing Front Crossmember (EF) $190.00
Place Racing Throttle Cable Bracket (EF) $15.00
Powerstop Crossdrilled Front and Rear Rotors $170.00
SiR Front End Conversion $700.00
Skunk 2 Dual Bend Short Shifter $100.00
Sparco Fuel Door $130.00
STR Racing Adj. Cam Gears $210.00
STR B16 Block Guard $100.00
STR Racing Fuel Rail $130.00
Tien SS coilover system $1,000.00
Unorthodox Racing Ultra A Alternator Pully $64.00
Unorthodox Racing Ultra R Underdrive Pully $165.00
Total: $7,732.00
1990 CRX SI rolling chassis with TOKICO ILLUMINA 6 way adjustable shocks and Skunk Works Coilovers, Energy Suspension Hyper-Flex Systems, Place Racing Crossmember, Place Racing Motor Mounts, Powerstop Front and Rear Crossdrilled rotors, AEM brake pads, Full 3inch custom cat back exhaust all installed. It also comes with 2 sets of doors, 2 sunroofs, and 2 hatches. I have a full JDM SiR Front end conversion that comes with fenders, hood, headlights, corner lights, side markers, and front bumper with lip. Full interior with the factory Recaros which is all in perfect condition. The Gude head package consists of port and polished intake and exhaust ports, 3 angle valve job, port matched intake manifold, oversized and port matched throttle body, Gude cams, and tuned ECU.
Would like to sell as a package for around $6000 OBO
If no offers for package I will part it out just make offers.
#2
Thread Starter
Join Date: Oct 2002
Location: St. Inigoes, MD, United States
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Re: MD,DC,VA huge sell!! everything must go CRX,b16,JDM tons of parts! (B16CRXSi)
bump me up up up.
Anyone interested??
If i can't sell on here i will just have to Ebay it all!
Anyone interested??
If i can't sell on here i will just have to Ebay it all!
#4
Thread Starter
Join Date: Oct 2002
Location: St. Inigoes, MD, United States
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Re: MD,DC,VA huge sell!! everything must go CRX,b16,JDM tons of parts! (B16CRXSi)
all brand new parts never even tried to put them on. I jsut don't have time to finish it.
#5
Thread Starter
Join Date: Oct 2002
Location: St. Inigoes, MD, United States
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Re: MD,DC,VA huge sell!! everything must go CRX,b16,JDM tons of parts! (B16CRXSi)
Just make offers. Those are the prices I paid. Just make me offers. I have planing on taking pics tonight.
Trending Topics
#8
Join Date: Dec 2004
Location: JDM SOUTH, United States
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Re: MD,DC,VA huge sell!! everything must go CRX,b16,JDM tons of parts! (B16CRXSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16CRXSi »</TD></TR><TR><TD CLASS="quote">
Apexi V-AFC $300.00
B16A JDM Bare Block $200.00
</TD></TR></TABLE>
Is that a V-AFC 1 or 2 for $300 ???
The Block..when you say bare what exactly is missing
Apexi V-AFC $300.00
B16A JDM Bare Block $200.00
</TD></TR></TABLE>
Is that a V-AFC 1 or 2 for $300 ???
The Block..when you say bare what exactly is missing
#9
Thread Starter
Join Date: Oct 2002
Location: St. Inigoes, MD, United States
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Re: MD,DC,VA huge sell!! everything must go CRX,b16,JDM tons of parts! (japspecnegro)
Its a V-AFC 1 and the bare block don't have pistons or the crank. Just make offer. The prices on top is what I paid. I was jsut putting those up so if some one wanted the whole package they would know how much I spent.
#14
Honda-Tech Member
Re: MD,DC,VA huge sell!! everything must go CRX,b16,JDM tons of parts! (crxgator)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxgator »</TD></TR><TR><TD CLASS="quote">what mugen steering wheel is it?</TD></TR></TABLE>
I wanna know the same thing.............
I wanna know the same thing.............
#15
Thread Starter
Join Date: Oct 2002
Location: St. Inigoes, MD, United States
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Re: MD,DC,VA huge sell!! everything must go CRX,b16,JDM tons of parts! (Ronin EG6)
I'll have to take a pic of the wheel for you. Its an old school mugen steering wheel
#22
Thread Starter
Join Date: Oct 2002
Location: St. Inigoes, MD, United States
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Re: (crxgator)
I know i promissed pics and i will get them. Just bear with me if you can. I am really busy that part of the reason i am selling is cuz i have no time to work on it. Sorry about the pic but they will come.